Hochschule für nachhaltige Entwicklung Eberswalde
•••
Menü

Prof. Dr.-Ing. Alexander Pfriem

Publikationen


a) Begutachtete Journal-Veröffentlichungen

  1. Friedrich, J.; LĂŒtje-Fournet, L.; Gengnagel, C.; Pfriem, A.: Brandschutztechnische ErtĂŒchtigung von HolzoberflĂ€chen durch Pyrolyse - Verbesserung der brandhemmenden Wirkung von pyrolysierten Fassadenhölzern. Holztechnologie, 62 (2021) 2, 23-35
  2. Sanne, M.; Kampe, A.; Lenz, C.; Gossel, S.; Wagner, S.; Haibel, A.; Melcher, E.; Pfriem, A., Lautner, S.: Anatomical studies of wood treated with pressure pulse shock waves. International Wood Products Journal, 12 (2021) 1, 3-6, DOI: 10.1080/20426445.2020.1838215
  3. Sanne, M.; Munier, L.-F.; Förster, T.; Dreyer, Ch.; Pfriem, A.: Einfluss der Schlichte von Celluloseregeneratsfasern auf die Zugscherfestigkeit bei Holzverklebungen. Holztechnologie, 61 (2020) 5, 38-42
  4. Sanne, M.; Ahn-Ercan, G.; Pfriem, A.: A mathematical Solution for calculating to the Springback in of moulded laminated Beech Stacks. Forests 11 (2020) 7, 725-736; https://doi.org/10.3390/f11070725
  5. Munier, L.F.; Franke,T.; Herold, N.; Pfriem, A.: Humidity’s Effect on the Dynamic-mechanical Behavior of Phenol-formaldehyde Impregnated Beech Wood Veneer. BioResources, 15 (2020) 1, 1563-1574
  6. Popescu, C.-M.; Pfriem, A.: Treatments and modification to improve the reaction to fire of wood and wood based products – an overview. Fire and Materials, 44 (2020) 1, 100-111; DOI: 10.1002/fam.2779
  7. Pfriem, A.: Review – Die Verwendung von Tropenholz im Musikinstrumentenbau - Chancen fĂŒr alternative Materialien? Holztechnologie. 59 (2018) 5, 15-20
  8. Kampe, A.; Pfriem. A.: A Note on Artificial Weathering of spruce (Picea abies) with a carbonized layer. International Wood Products Journal. 9 (2018) 2, 86-89; https://doi.org/10.1080/20426445.2018.1493841
  9. Franke, T.; Herold, N.; Buchelt, B.; Pfriem, A.: The Potential of Phenol-Formaldehyde as Plasticizing Agent for Moulding Applications of Wood Veneer - Two-Dimensional and Three-Dimensional Moulding. European Journal of Wood and Wood Products. 76 (2018) 5, 1409-1416; DOI: 10.1007/s00107-018-1320-1
  10. Franke, T.; Mund, A.; Lenz, C.; Herold, N.; Pfriem, A.: Microscopic and Macroscopic swelling and dimensional stability of beech wood impregnated with phenol-formaldehyde, ProLigno, 13 (2017) 4, 373-378
  11. Rademacher, P.: Bader, M.; Nemeth, R.; Klimek, P.; Sprdlik, V.; Rousek, R., Cermak, P.; Pfriem, A.; Sanne, M.; Meinlschmidt, P.; Wimmer, R.; Trischler, J.; Sandberg, D.: From native wood to engineered materials, Part 3: engineered hybrid wood-based products, ProLigno, 13 (2017) 4, 361-372
  12. Wulf, F.; Sanne, M.; Pfriem, A.: Coatings for use on wooden bicycle frames – requirements, test methods and artificial weathering results. Drvna industrija – “Wood Industry”, 68 (2017) 4, 281-289
  13. Franke, T.; Lenz, C.; Hertrich, S.; Kuhnert, N.; Kehr, M.; Herold, N.; Pfriem, A.: KĂŒnstliche Bewitterung von Buchenfurnier imprĂ€gniert mit drei Phenolharzen unterschiedlichen Molekulargewichts. Holztechnologie, 58 (2017) 1, 24-30
  14. Zerbst, D.; Baensch, F.; Pfriem, A.; Niemz, P.: Visko-elastisches Verhalten von Holz-Klebstoff-Verbindungen unter zyklischer Belastung. Bautechnik, 93 (2016) 11, 795-800, DOI: 10.1002/bate.201500102
  15. Baensch, F.; Clauder, L.; Cordes, D.; Melcher, E.; Pfriem, A.: Farbanalyse an thermisch modifizierten und wachsimprĂ€gnierten Hölzern nach kĂŒnstlicher Bewitterung. Holztechnologie, 57 (2016) 2, 23-30
  16. Pfriem, A.: Thermally modified wood for use in musical instruments. Drvna industrija – “Wood Industry”, 66 (2015) 3, 251-253
  17. Herold, N.; Grigsby, W.; Franich, R.; Pfriem, A.: Changes in Stiffness of Wood Veneer during Furfuryl Alcohol Modification. European Journal of Wood and Wood Products, 73 (2015) 5, 693-695, DOI: 10.1007/s00107-015-0941-x
  18. Hughes, M.; Hill, C.A.S.; Pfriem, A.: The toughness of hydrothermally modified wood – A review. Holzforschung, 69 (2015) 7, S. 851-862, DOI: 10.1515/hf-2014-0184
  19. Wulf, F.; Schulz, K.; Brösel, L.; Pfriem, A.: Mineralized wood fibre reinforced concrete as stiffening elements with reduced density. Drvna industrija – “Wood Industry”, 66 (2015) 1, S. 57-62
  20. Zauer, M.; Hempel, S.; Pfriem, A.; Mechtcherine, V.; WagenfĂŒhr, A.: Investigations of the pore-size distribution of wood in the dry and wet state by means of mercury intrusion porosimetry. Wood Science and Technology. 48 (2014) 6, S. 1229-1240
  21. Herold, N.; Lenz, C.; Pfriem, A.: Changes in Cell Wall Dimensions during the Different Stages of Furfuryl Alcohol Modification. BioRessources, 9 (2014) 3, S. 4756-4763
  22. Wulf, F.; Barth, H.; Pfriem, A.: Herstellung eines porösen Werkstoffes aus Natriumwasserglas und Holzpartikeln als Schallabsorber in Akustikplatten. Holztechnologie, 55 (2014) 3, S. 26-32
  23. Herold, N.; Pfriem, A.: Shape Retention of Furfurylated and Moulded Wood Veneer. BioResources, 9 (2014) 1, S. 545-553
  24. Shchupakivskyy, R.; Clauder, L.; Linke, N.; Pfriem, A.: Application of high-frequency densitometry to detect changes in early- and latewood density of Oak (Quercus robur L.) due to thermal modification. European Journal of Wood and Wood Products, 72 (2014) 1, S. 5-10
  25. Zauer, M.; Kretzschmar, J.; Großmann, L.; Pfriem, A.; WagenfĂŒhr, A.: Analysis of the pore-size distribution and fiber saturation point of native and thermally modified wood using differential scanning calorimetry. Wood Science and Technology, 48 (2014) 1, S. 177-193
  26. Sproßmann, R.; Zauer, M.; Pfriem, A.; WagenfĂŒhr, A.: Zum Einfluss der Holzart in BassgitarrenhĂ€lsen auf das Schwingungs- und Klangverhalten. Holztechnologie, 54 (2013) 4, S. 19-25
  27. Zauer, M.; Pfriem, A.; WagenfĂŒhr, A.: Toward improved understanding of the cell-wall density and porosity of native and thermally modified wood determined by gas pycnometry. Wood Science and Technology, 47 (2013) 6, S. 1197-1211
  28. Pfriem, A.; Clauder, L.; Linke, N.; Shchupakivskyy, R.: Anwendung der Hochfrequenz-Dichtemessung zur Erfassung der lokalen DichteÀnderung von Eichenholz infolge einer thermischen Modifikation. Holztechnologie, 54 (2013) 3, S. 30-34
  29. Pfriem, A.: Fachbereich Holztechnik an der Hochschule fĂŒr nachhaltige Entwicklung Eberswalde (FH). Holztechnologie, 54 (2013) 4, S. 56-57
  30. Herold, N., Pfriem, A.: Impregnation of Veneer with Furfuryl Alcohol for an Improved Plasticization and Moulding. European Journal of Wood and Wood Products, 71 (2013) 2, S. 281-282
  31. Herold, N.; Dietrich, T.; Grigsby, W.; Franich, R.; Winkler, A.; Buchelt, B.; Pfriem, A.: Effect of Maleic Anhydride Content and Ethanol Dilution on the Polymerization of Furfuryl Alcohol in Wood Veneer Studied by Differential Scanning Calorimetry. BioResources 8 (2013) 1, S. 1064-1075
  32. Horbens, M.; Pfriem, A.; Ganster, J.; WagenfĂŒhr, A.: Herstellung und Charakterisierung von Holzfasern definierter Eigenschaften fĂŒr deren Verwendung als VerstĂ€rkungsfasern in Holz-Polypropylen-Verbundwerkstoffen. Holztechnologie, 53 (2012) 6, S. 21-25
  33. Buchelt, B.; Pfriem, A.; WagenfĂŒhr, A.: Investigations of the compressive behavior of veneer in thickness direction. Drvna industrija – “Wood Industry”, 63 (2012) 1, S. 33-36
  34. Pfriem, A., Dietrich, T., Buchelt, B.: Furfuryl alcohol impregnation for improved plasticization and fixation during the densification of wood. Holzforschung, 66 (2012) 2, S. 215-218
  35. Pfriem, A.: Alteration of water absorption coefficient of spruce (Picea abies (L.) Karst.) due to thermal modification. Drvna industrija – “Wood Industry”, 62 (2011) 4, 311-313
  36. Buchelt, B.; Pfriem, A.: Influence of wood specimen thickness on its mechanical properties by tensile testing – solid wood versus veneer. Holzforschung, 65 (2011) 2, S. 249-252
  37. Buchelt, B.; Pfriem, A.; WagenfĂŒhr, A.; Scheiding, W.: Thermisch modifizierte Furniere fĂŒr dekorative Zwecke. Holztechnologie 52 (2011) 1, S. 16-21
  38. Pfriem, A.; Buchelt, B.: Influence of the slicing technique on mechanical properties of the produced veneer. European Journal of Wood and Wood Products 69 (2011) 1, S. 93-99
  39. Pfriem, A.; Buchelt, B.; Zauer, M.; WagenfĂŒhr, A.: Comparative analysis of thermally modified and native spruce loaded perpendicular to the grain. European Journal of Wood and Wood Products, 68 (2010) 3, S. 267-270
  40. Scholz, G.; Zauer, M.; van den Bulcke, J.; van Loo, D.; Krause, A.; Pfriem, A.; van Acker, J.; Militz, H.: Investigation on wax-impregnated wood. Part 2: Study of void spaces filled with air by He pycnometry, Hg intrusion porosimetry, and 3D X-ray imaging. Holzforschung, 64 (2010) 5, S. 587–593
  41. Pfriem, A.; Zauer, M.; WagenfĂŒhr, A.: Alteration of the unsteady sorption behaviour of maple (Acer pseudoplatanus L.) and spruce (Picea abies (L.) Karst.) due to thermal modification. Holzforschung, 64 (2010) 2, S. 235-241
  42. Peters, J.; Pfriem, A.; Horbens, M.; Fischer, S.; WagenfĂŒhr, A.: Emissions from thermally modified beech wood, their reduction by solvent extraction and fungicidal effect of the organic solvent extracts. Wood Material Science and Engineering, 4 (2009) 1, S. 61-66
  43. Pfriem, A.; Horbens, M.; Beyer, M.; Peters, J.: Untersuchung von Extraktstoffen aus thermisch modifizierter Rotbuche (Fagus sylvatica L.) auf ihre fungizide Wirkung. Holztechnologie 50 (2009) 2, S. 32-36
  44. Pfriem, A.; Zauer, M.; WagenfĂŒhr, A.: Alteration of the pore structure of spruce (Picea abies (L.) Karst.) and maple (Acer pseudoplatanus L.) due to thermal treatment as determined by helium pycnometry and mercury intrusion porosimetry. Holzforschung, 63 (2009) 1, S. 94-98
  45. Pfriem, A.; Zauer, M.; Oertel, M.; WagenfĂŒhr, A.: Vergleichende Untersuchungen zur Zerspanbarkeit von ligninbasierenden Werkstoffen, mitteldichten Faserplatten sowie Spanplatten. Holz als Roh- und Werkstoff, 66 (2008) 5, S. 379-380
  46. Pfriem, A.; WagenfĂŒhr, A.: FeuchtigkeitsabhĂ€ngigkeit des ElastizitĂ€tsmoduls thermisch modifizierter und nativer Fichte (Picea abies (L.) Karst.). Holz als Roh- und Werkstoff, 66 (2008) 1, S. 77-79
  47. Pfriem, A.; Grothe, T.; WagenfĂŒhr, A.: Einfluss der thermischen Modifikation auf das instationĂ€re Sorptionsverhalten von Fichte (Picea abies (L.) Karst.). Holz als Roh- und Werkstoff, 65 (2007) 4, S. 321-323
  48. Pfriem, A.; Eichelberger, K.; WagenfĂŒhr, A.: Acoustic properties of thermally modified spruce for use for violins. Journal of the Violin Society of America: VSA-Paper 21 (2007) 1, S. 102-111
  49. WagenfĂŒhr, A.; Pfriem, A.; Grothe, T.; Eichelberger, K.: Untersuchungen zur vergleichenden Charakterisierung von thermisch modifizierter Fichte fĂŒr Resonanzdecken von Gitarren. Holz als Roh- und Werkstoff, 64 (2006) 4, S. 313-316
  50. WagenfĂŒhr, A.; Buchelt, B.; Pfriem, A.: Material Behaviour of Veneer during multidimensional Moulding. Holz- als Roh- und Werkstoff, 64 (2006) 2, S. 83-89
  51. Cong, N.T.; Pfriem, A.; WagenfĂŒhr, A.: Alternatives Verfahren zur Zerfaserung von Einjahrespflanzen fĂŒr die Herstellung von Faserwerkstoffen fĂŒr klein- und mittelstĂ€ndische Unternehmen, Teil 2 Werkstoffherstellung und -eigenschaften. Holztechnologie 47 (2006) 6, S. 18-25
  52. Cong, N.T.; Pfriem, A.; WagenfĂŒhr, A.: Alternatives Verfahren zur Zerfaserung von Einjahrespflanzen fĂŒr die Herstellung von Faserwerkstoffen fĂŒr klein- und mittelstĂ€ndische Unternehmen, Teil 1 Vorstellung des Zerfaserungsprozesses. Holztechnologie 47 (2006) 4, S. 11-15
  53. WagenfĂŒhr, A.; Pfriem, A.; Eichelberger, K.: Der Einfluss einer thermischen Modifikation von Holz auf einige im Musikinstrumentenbau relevanten Eigenschaften – Teil 2 technologische Eigenschaften, Herstellung und PrĂŒfung von Musikinstrumentenbauteilen. Holztechnologie 47 (2006) 1, S. 40-44
  54. WagenfĂŒhr, A.; Pfriem, A.; Eichelberger, K.: Der Einfluss einer thermischen Modifikation von Holz auf einige im Musikinstrumentenbau relevanten Eigenschaften – Teil 1 ausgewĂ€hlte anatomische und physikalische Eigenschaften. Holztechnologie 46 (2005) 4, S. 36-42
  55. WagenfĂŒhr, A.; Pfriem, A.; Tech, S.: Untersuchungen zum Aufschluss von Holz und FlachsschĂ€ben im Extruder zur Herstellung von Holzwerkstoffen. Holz als Roh- und Werkstoff 62 (2004) 3; S. 237-238


b) Eingereichte Manuskripte

  1. LĂŒbken, V.; Linke, G.; Pfriem, A.; Rug, W.; Weiß, M.: Untersuchungen zum Trag- und Verformungsverhalten von historischen Brettschichtholzbauteilen. Bauingenieur
  2. Mensah, I.; Ahiekpor, J.C.; Herold, N.; Bensah, E.C.; Pfriem, A.; Antwi, E.; Amponsem, B.: Biomass and Plastic Co-pyrolysis for Syngas Production: Physicochemical properties of Celtis Mildbraedii Sawdust. Scientific African, Elsevier
  3. Klemichen, A.; Wulf, F.; Hagedorn, L.; Munier, L.-F.; Mathi, C.; Stark, R.; Pfriem, A.: A make-over of the furniture industry through platform based business models - a systematic literature review and use case analysis. Sustainability


c) KonferenzbeitrÀge / BuchbeitrÀge

  1. Bansamir, L.; Wulf, F.; Brodhagen, T.; Pfriem, A.: Consolidation of wood shavings-sand mixtures by biomineralization. 10th European Conference on Wood Modification, 25.-26.04.2022, Nancy, Frankreich
  2. Bender, T.; Munk, Ch.; Pfriem, A.; Damay, J.; Fredon, E.; RĂ©mond, R.; MĂ©ausoone, P. J.; Akong, F. O.; Gerardin, P.; Jousserand, M.: Influence of thermal modification on the impregnability of beech (Fagus sylvatica [L.]) and European Maple (Acer pseudoplatanus [L.]). 10th European Conference on Wood Modification, 25.-26.04.2022, Nancy, Frankreich
  3. Wozniak, M.; Wulf, F.; Pfriem, A.: Investigation of a change in the hardness properties of thermally modified beech wood (Fagus sylvatica L) as a result of a 6-week long-term temperature at 120°C and 140°C. 10th European Conference on Wood Modification, 25.-26.04.2022, Nancy, Frankreich
  4. Munk, Ch.; Pfriem, A.: Influence of thermal modification and subsequent linseed oil impregnation on the sound propagation velocity and related acoustic properties of various wood species. 10th European Conference on Wood Modification, 25.-26.04.2022, Nancy, Frankreich
  5. Wozniak, M.; Wulf, F.; Munier, L.-F.; Mund, A.; Pfriem, A.: Reduce, Reuse, Recycle im Möbelsektor. 20. Holztechnologisches Kolloquium Dresden, 28.-29.04.2022, Dresden
  6. BrĂŒgge, J.; Pfriem, A.: BioBasedBoats – wie der Bootsbau nachhaltiger werden kann. 13. LĂŒbecker Werkstofftag, 24.03.2022, LĂŒbeck
  7. Pfriem, A.; LĂŒtje-Fournet, L.: PyroForCE and PyroConti - Pyrolysis for construction elements. Online Conference Wood Modification 16.3.2022, Hamburg
  8. Pfriem, A.: VerfĂŒgbare Quellen fĂŒr Bootsbau-Hölzer und Möglichkeiten durch Ersatzhölzer. 8. Classic Yacht Symposium. 04.02.2022, KielMunk, C.; Wohlert, H.; Pfriem, A.: Investigation of the influence of two different thermal treatment processes on the change of various material properties of spruce resonance wood (Picea abies (L.) Karst). 17th annual meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE), 14.-15.10.2021, Kaunas, Lithuania
  9. Sanne, M.; Sperling, C.; Pfriem, A.: Investigation of the influence of fabric inforcement in bamboo T-connectors. 17th annual meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE), 14.-15.10.2021, Kaunas, Lithuania
  10. Pfriem, A.: Nativ-basierte Leichtbaukonzepte mit Holz. Enabling-Veranstaltung fĂŒr Unternehmen mit dem Fokus Kunststoffverarbeitung und Leichtbautechnologien. MS-Teams, 11.05.2021
  11. Bansamir, L.; Wulf, F.; Brodhagen, T., Pfriem, A.: Surface coating of pyrolyzed and native wood surfaces with calcium carbonate crystals by biomineralization. 15th annual meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE), 09-10.10.2019, Lund, Schweden
  12. Sanne, M.; Makowski, S.; Ahn-Ercan, G.; Pfriem, A.: Springback effect on laminated beech sheets/stacks. 15th annual meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE), 09-10.10.2019, Lund, Schweden
  13. Munk, C.; Clauder, L.; Pfriem, A.: Sound absorption coefficient of thermally modified and unmodified wood species measured in an impedance tube. 15th annual meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE), 09-10.10.2019, Lund, Schweden
  14. Kampe, A.; Clauder, L.; Pfriem, A.: Application of chemical buffers to prevent and reduce VOC-emissions of different wood species. 15th annual meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE), 09-10.10.2019, Lund, Schweden
  15. Bender, T.; Clauder, L.; Pfriem, A.: Comparison of different recipes for thermal modification of European tone wood and their influence on the acoustic behavior. 15th annual meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE), 09-10.10.2019, Lund, Schweden
  16. Mund, A.; Munier, L.F.; Franke, T.; Herold, N.; Pfriem, A.: Investigating the shape stability of moulded phenol-formaldehyde modified beech veneers by means of digital image correlation. 21st International Nondestructive Testing and Evaluation of Wood Symposium, Freiburg, 24.-27.09.2019
  17. Pfriem, A.; Wulf, F.; Brodhagen, T.: Das Brandverhalten von Holz und dessen PrĂŒfung. Symposium Brandsicherheit und GefĂ€hrdungspotential im Kontext neuartiger innovativer Bauweisen und Produkte, Wildau, 09.05.2019
  18. Zauer, M.; Pfriem, A.: Tropical hardwood in musical instruments and case studies to their substition by modified wood. In: Marco A. PĂ©rez [Hrsg.]: Book of End of WoodMusICK COST Action FP1302 Wooden Musical Instruments: Different Forms of Knowledge. 2018
  19. Gossel, S.; Sanne, M.; Wagner, S.; Pfriem, A.; Lautner, S.; Leu, C.: Pressure pulse impregnation process using high voltage technology - Generation of electrohydraulic discharges to improve treatability of softwoods with impregnating liquid. VDE-Hochspannungstage, Berlin, 12.-14.11.2018
  20. Munk, C.; Clauder, L.; Pfriem, A.: Acoustical comparison of two different guitars, made of untreated tropical wood and thermally modified wood, using a frequency response analysis. 14th annual meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE), 02-03.10.2018, Tallinn, Estland
  21. Sanne, M.; Kampe, A.; Leonard, M.; Herold, N.; Pfriem, A.: Bambulator – an example of sustainable bioeconomy. 14th annual meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE), 02-03.10.2018, Tallinn, Estland
  22. Bender, T.; Clauder, L.; KrĂŒger, R.; Pfriem, A.: Frequency-response-determination of tonewood as an alternative to modal analysis.14th annual meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE), 02-03.10.2018, Tallinn, Estland
  23. Pfriem, A.: Chapter 5.5.5. Pyrolysis Machine. In: Zeinali D., Kolaitis, D.I. [Hrsg.] Guide for Obtaining Data from Reaction to Fire Tests. COST FP 1404, 2018
  24. BĂĄder, M.; Bak, M.; NĂ©meth, R.; Rademacher, P.; Rousek, R.; Horníček, S.; DömĂ©ny, J.; KlĂ­mek, P.; Kudela, J.; Sandberg, D.; Neyses, B.; Kutnar, A.; Wimmer, R.; Pfriem, A.: Wood Densification processing for newly engineered materials. Proceedings of the 5th International Conference on Processing Technologies for the Forest and Bio-based Products Industries (PTF BPI 2018) Freising/Munich, 20.-21.09.2018
  25. Zerbst, D.; Clauder, L.; Olson, D.; Pfriem, A.: Influence on acoustical properties of resonant soundboard material through different processes of thermal modification. 9th European Conference on Wood Modification, Arnhem, Netherland, 17.-18.09.2018
  26. Hertrich, S.; Clauder, L.; Lautner, S.; Pfriem, A.: Comparative studies on the biological durability of identical thermally modified wood from field and laboratory tests. 9th European Conference on Wood Modification, Arnhem, Netherland, 17.-18.09.2018
  27. Munier, L.F.; Franke, T.; Herold, N.; Pfriem, A.: The effect of humidity on the dynamic-mechanical behaviour of phenol-formaldehyde impregnated beech wood veneer. 9th European Conference on Wood Modification, Arnhem, Netherland, 17.-18.09.2018
  28. Pfriem, A.: Tropenholzproblematik im Musikinstrumentenbau, Chancen fĂŒr alternative Materialien? 18. Holztechnologisches Kolloquium, Dresden, 12.-13.04.2018
  29. Pfriem, A.: Neue Fensterhölzer durch Holzmodifikation: Accoya, Thermoholz, Furfurylierung, Bautec Fenster-Fachtagung 2018 „Neue Techniken – Neue Werkstoffe“, 21.2.2018, Berlin
  30. Franke, T.; Mund, A.; Lenz, C.; Herold, N.; Pfriem, A.: Microscopic and Macroscopic swelling and dimensional stability of beech wood impregnated with phenol-formaldehyde, Conference Wood Science and Engineering in the third Millennium, 2-4.11.2017, Brasov, Romania
  31. Rademacher, P.: Bader, M.; Nemeth, R.; Klimek, P.; Sprdlik, V.; Rousek, R., Cermak, P.; Pfriem, A.; Sanne, M.; Meinlschmidt, P.; Wimmer, R.; Trischler, J.; Sandberg, D.: From native wood to engineered materials, Part 3: engineered hybrid wood-based products, Conference Wood Science and Engineering in the third Millennium, 2-4.11.2017, Brasov, Romania
  32. Sanne, M.;  Kampe, A.; Lenz, C.; Gossel, S.; Wagner, S.;  Haibel, A.; Melcher, E.; Pfriem, A., Lautner, S.: Anatomical studies of wood treated with pressure pulse shock waves. 13th annual meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE), 28-29.09.2017, Copenhagen, Denmark
  33. Clauder, L.; Stephan, J.-P.; Pfriem, A.: Products made of thermally modified timber and tested especially for applications in Asiatic countries. 13th annual meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE), 28-29.09.2017, Copenhagen, Denmark
  34. Kampe, A.; Murr, J.; Peters, T.; GĂŒnther, M.T.; Pfriem, A.: Artificial weathering of spruce (pieca abies) with carbonized covering layer. 13th annual meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE), 28-29.09.2017, Copenhagen, Denmark
  35. Franke, T.; Herold, N.; Kampe, A.; Pfriem, A.: Use of Phenolic Resins for Hardwood Veneer Modification for Moulding Applications. International Scientific Conference on Hardwood Processing, 25-28.09.2017, Lahti, Finland
  36. Shchupakivskyy, R.; Pfriem, A.: The short-term wood creep test by means of DMA. COST FP1402 Conference, 13.-15.09.2017, Graz, Austria
  37. Clauder, L.; Montibus , M.; Kuttnik, M.; Pfriem, A.: Analysis of wood-destroying fungi in TMT samples. COST FP1303 Final Conference, 6-7.09.2017, Zagreb, Croatia
  38. Nölting, B.; Pape, J.; Dembski, N.; KrĂ€usche, K.; Lehmann, K.; Molitor, H.; Pfriem, A.; Walk, H.: ‘Third mission’ and ‘transfer’ as impetus for sustainable universities – The transfer strategy of the Eberswalde University for Sustainable Development. IST Conference 2017- The 8th International Sustainability Transitions Conference: Taking the lead in real world transitions, 18-21.06.2017 , Gothenburg, Sweden
  39. Zauer, M.; Kretzschmar, J.; Pfriem, A.; WagenfĂŒhr, A.: Determination of hygroscopic properties of wood by means of differential scanning calorimetry. 1st Journal of Thermal Analysis and Calorimetry Conference and 6th V4 Thermoanalytical Conference. 06.-09.06.2017, Budapest, Hungary
  40. Pfriem, A.: Potenziale von Naturfasern fĂŒr den Leichtbau. Konferenz Kunststoff trifft Holz, 16.03.2017, Eberswalde
  41. Clauder, L.; Mansour, E.; Ormondroyd, G.; Pfriem, A.: missions from bio-based building products. COST ACTION FP1303 Workshop / Management Committee Meeting “Design, Application and Aesthetics of biobased building materials” 28.-01.03.2017, Sofia, Bulgaria
  42. Pfriem, A.: Modification Methods and their relation to reaction to fire. MC and WG meetings COST Action FP1404, 02.-03.02.2017, Prague, Czech Republic
  43. Pfriem, A.: Umgang mit geschĂŒtzten tropischen Hölzern. Vortrag „Musik und Technik – Feinmechanik made in Brandenburg“, 18.01.2017, Musikmuseum Beeskow
  44. Pfriem, A.: Holz als Rohstoff fĂŒr innovative biobasierte Produkte. Vortrag 2 Innovationsakademie Lignocellulose. Berlin, 08.11.2016
  45. Pfriem, A., Zerbst, D.; Clauder, L.: "Thermo Treated Tonewood - Vintage Vibe or Voodoo?" EGB Symposium and The Holy Grail Guitar Show 2016, 07.10.2016, Berlin
  46. Stenzel, M., Sanne, M., LarnĂžy, E., Treu, A., Herold, N., Pfriem, A.: Development of a test setup for the dynamic mechanical analysis of wood samples in tensile strength mode. 12th annual meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE), Riga, Latvia, 12-13.09.2016
  47. Kampe, A., Franke, T., Herold, N., Pfriem, A.: Curing behavior of phenolic resins in beech veneer (Fagus sylvatica L.). 12th annual meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE), Riga, Latvia, 12-13.09.2016
  48. Zauer, M.; Pfriem, A.; WagenfĂŒhr, A.: Investigations towards dynamic properties of modified Sycamore maple for utilization as highly stressed tonewood. Hardwood Conference, Sopron, Ungarn, 08.-09.09.2016
  49. Franke, T.; Lenz, C.; Pfriem, A.; Herold, N.: Improving the plasticization and form stability of wood veneer by phenol/formaldehyde modification. World Conference on Timber Engineering, Wien, Österreich, 22.-25.08.2016
  50. Blomqvist, L.; Pfriem, A.; Johansson, J.: Temporary buildings in reusable lightweight material. World Conference on Timber Engineering, Wien, Österreich, 22.-25.08.2016
  51. Zauer, M.; Pfriem, A.: Einsatz thermisch modifizierter Hölzer im Musikinstrumentenbau. 9. EuropÀischer TMT-Workshop, Dresden, 26.-27. Mai. 2016
  52. Pfriem, A.: Holz - ein Konstruktionswerkstoff der Zukunft. Vortrag VDI Bezirksverband Berlin Brandenburg, Berlin, 19.05.2016
  53. Franke, T.; Lenz, C.; Kehr, M.; Kuhnert, N.; Munier, L. F.; Schultz, M.; Hertrich, S.; Herold, N.: Pfriem, A.: KĂŒnstliche Bewitterung von phenolharzimrĂ€gniertem Buchenfunier (Fagus sylvatica). Poster, 17. Holztechnologisches Kolloquium, Dresden, 28.-29.04.2016
  54. Pfriem, A.; Ibisch, P.: Perspektiven und Konzepte zum Promotionsrecht fĂŒr Fachhochschulen in Brandenburg. In: Engelfried, C.; Ibisch, P. (Hg.) Am Wendepunkt? Promovieren an und mit Hochschulen fĂŒr Angewandte Wissenschaften. Barbara Budrich Verlag, 2016
  55. Zerbst, D.; Horbelt, N.; Brodhagen, T.; Stegmann, F.; Brösel, L.; Pockrandt, M.; Herold, N.; Pfriem, A.: Influence of Wood Species on the Melting Behaviour of Waxes Investigated by Differential Scanning Calorimetry. 8th European Conference on Wood Modification, Helsinki, Finnland, 26.-27.10.2015
  56. Kampe, A.; Herold, N.; Pfriem, A.: Impact of wood species on furfuryl alcohol modification studied by DSC. 8th European Conference on Wood Modification, Helsinki, Finnland, 26.-27.10.2015
  57. Clauder, L.; Mansour, E.; Ormondroyd, G.; Pfriem, A.: Emissions based metal corrosion due to native and chemically modified timber. 8th European Conference on Wood Modification, Helsinki, Finnland, 26.-27.10.2015
  58. Pfriem, A.; Herold, N.: Simultaneous Moulding and Fixation of Veneer by Furfuryl Alcohol Modification. Thermosets 2015: from Monomers to Components, Berlin; Deutschland, 16.-18.09.2015
  59. Baensch, F.; Cordes, D.; Melcher, E.; Pfriem, A.: Accelerated weathering tests on thermally modified and wax-impregnated wood, 11th annual meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE), Poznan, Poland. 14-15.09.2015
  60. Pfriem, A.: Holz - ein Konstruktionswerkstoff der Zukunft - Von der Idee zur Entwicklung und Vermarktung des „Wooden E-Bike“, IndustrieKonferenz Brandenburg, Cottbus, 02.07.2015
  61. LĂŒbke, L.; Hill, C.A.S.; Pfriem, A.: Bound water in small wood samples investigated by low-field nuclear magnetic resonance. 10th meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE), Edinburgh, Scotland, 13.-14.10.2014
  62. Franke, T.; Clauder, L.; Pfriem, A.: Using wood as display case material for museums – an approach for the production of low-emission wood. 10th meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE), Edinburgh, Scotland, 13.-14.10.2014
  63. Clauder, L.; Pfriem, A.: Comparative durability tests on TMT Beech – preliminary results. 10th meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE), Edinburgh, Scotland, 13.-14.10.2014
  64. Horbelt, N.; Bertinetti, L.; Fratzl, P.; Pfriem, A.; Eder, M.: The combined influence of varying microfibril angle and relative humidity on the tensile stiffness of single spruce fibers. International symposium WoodSciCraft 2014 “Wood Science and Craftsmanship: Cross perspective between Europe and Japan”. Montpellier, France, 8.-12.09.2014
  65. Clauder, L.; Pfriem, A.: QualitĂ€tssicherung –Vorhersagbarkeit der Dauerhaftigkeit von TMT. 8. EuropĂ€ischer Thermoholz Workshop, 22.-23.05.2014, Dresden
  66. Pfriem, A.: Thermally modified wood for use in musical instruments – a review. Final Cost Action FP0904 Conference “Recent Advances in the Field of TH and THM Wood Treatment” 19.-21.05.2014, SkellefteĂ„, Sweden
  67. Clauder; L., Pfriem, A.: Comparative durability tests on TMT Beech – preliminary results. Final Cost Action FP0904 Conference “Recent Advances in the Field of TH and THM Wood Treatment” 19.-21.05.2014, SkellefteĂ„, Sweden
  68. Clauder, L.; Pfriem, A.: Emissions from thermally modified wood. Final Cost Action FP0904 Conference “Recent Advances in the Field of TH and THM Wood Treatment” 19.-21.05.2014, SkellefteĂ„, Sweden
  69. Brösel, L.; Clauder, L.; Pfriem, A.: Flammability tests on thermally modified and untreated timbers. Final Cost Action FP0904 Conference “Recent Advances in the Field of TH and THM Wood Treatment” 19.-21.05.2014, SkellefteĂ„, Sweden
  70. Shchupakivskyy, R.; Pfriem, A.; Clauder, L.: Statistical simulation of wood density changes due to thermal treatment. 7th European Conference on Wood Modification, Lissabon, Portugal, 10.-12.03.2014
  71. Pfriem, A.; Clauder, L.; Linke, N.; Shchupakivskyy, R.: Application of high-frequency densitometry to detect changes in early- and latewood density of oak (Quercus robur L.) due to thermal modification. 7th European Conference on Wood Modification, Lissabon, Portugal, 10.-12.03.2014
  72. Clauder, L.; Pfriem, A.; RĂ„demar M.; Rosell, L.; Vestergren M.: Emissions from TMT products. 7th European Conference on Wood Modification, Lissabon, Portugal, 10.-12.03.2014
  73. Herold, N.; Lenz, C.; Pfriem, A.: Changes in Cell Wall Dimensions during the Different Stages of Furfuryl Alcohol Modification. 7th European Conference on Wood Modification, Lissabon, Portugal, 10.-12.03.2014
  74. Herold, N.; Pfriem, A.: Simultaneous moulding and fixation of veneer by specific material modification. 7th European Conference on Wood Modification, Lissabon, Portugal, 10.-12.03.2014
  75. Pfriem, A.; Wulf, F.: Research with musical instruments at University of Applied Sciences Eberswalde. COST Action FP1302 opening conference, Paris, Frankreich, 27.-28.02.2014
  76. Clauder, L.; RĂ„demar, M.; Rosell, L.; Vestergren, M.; Pfriem, A.: Emissions from TMT products. COST FP0904 & FP1006 Meeting, Rogla, Slovenia, 16.-18.Oktober 2013
  77. Herold, N.; Pfriem, A.: Set-recovery of furfurylated and shaped veneer. 9th meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE), Hannover, Germany, 11.-12.09.2013
  78. Maksymiv, V.; Pfriem, A.; Shchupakivskyy, R.; Clauder, L.; Kijko, O.; Andrashek, J.: Statistical simulation of wood density changes due to thermal treatment. XXI. Symposium Adhesives in Woodworking Industry, Zvolen, Slovakia, 26-28 June 2013
  79. Clauder, L.; Richter S.; Unger, W.; Pfriem. A.: Application of a model for the prediction of fungal degradation of thermally modified timber by Trametes versicolor. International Research Group on Wood Protection 44rd Annual Meeting, Stockholm, Sweden, 16-20 June 2013
  80. Pfriem, A.; Zander, M.; Clauder, L.: Baltic Sea network for efficient and sustainable wood processing based on wood modification processes. COST Action FP0904 Workshop “Evaluation, processing and predicting of THM treated wood behaviour by experimental and numerical methods”, Iasi, Romania, 09.-11. April 2013
  81. Clauder, L.; Pfriem, A.: Determination of dimensional stability of thermally modified beech and spruce wood. COST Action FP0904 Workshop “Evaluation, processing and predicting of THM treated wood behaviour by experimental and numerical methods”, Iasi, Romania, 09.-11. April 2013
  82. Herold, N.; Dietrich, T.; Grigsby, W.; Franich, R.; Winkler, A.; Buchelt, B.; Pfriem, A.: Effects of Maleic Anhydride on the Curing of Furfuryl Alcohol in Wood Veneer Studied by Differential Scanning Calorimetry. Workshop “Micro Characterisation of Wood Material & Properties”, Edinburgh, Scotland, 24.-26. Oktober 2012
  83. Pfriem, A.; Zander, M.: Network for efficient and sustainable wood processing based on wood modification processes. Workshop “Micro Characterisation of Wood Material & Properties”, Edinburgh, Scotland, 24.-26. Oktober 2012
  84. Zauer, M.; Pfriem, A.; Dietrich, T.; WagenfĂŒhr, A.: Investigation of the pore structure of native and thermally modified wood using thermoporosimetry. Workshop “Micro Characterisation of Wood Material & Properties”, Edinburgh, Scotland, 24.-26. Oktober 2012
  85. Pfriem, A.: Holzkundliche Untersuchungen zu VerĂ€nderungen im Holz wĂ€hrend der thermischen Modifizierung – Application of High-Frequency Densitometry to detect Changes in Early- and Latewood Density of Oak (Quercus robur L.) due to Thermal Modification. 2. Dresdner Holzanatomisches Kolloquium, Dresden, 18.-19. Oktober 2012
  86. Herold, N.; Dietrich, T.; Grigsby, W.; Buchelt, B.; Franich, R.; Pfriem, A.: Effects of Different Process Parameters on the Polymerisation of Furfuryl Alcohol in Wood Studied by DSC. 6th European Conference on Wood Modification, Ljubljana, Slowenien, 16-18.09.2012
  87. Herold, N.; Pfriem, A.: Impregnation of Veneer with Furfuryl Alcohol for an Improved Plasticization and Moulding. 6th European Conference on Wood Modification, Ljubljana, Slowenien, 16-18.09.2012
  88. Zauer, M.; Pfriem, A.; WagenfĂŒhr, A.: Alteration of the pore structure and the capillarity of wood due to thermal modification. 6th European Conference on Wood Modification, Ljubljana, Slowenien, 16-18.09.2012
  89. Dietrich, T.; Buchelt, B.; Pfriem, A.: Properties of Furfuryl Alcohol modified and densified Beech wood (Fagus Sylvatica L.). 6th European Conference on Wood Modification, Ljubljana, Slowenien, 16-18.09.2012
  90. Clauder, L.; Shchupakivskyy, R.; Pfriem, A.: Application of High-Frequency Densitometry to detect the change in Early- and Latewood Density of Oak (Quercus Robur L.) due to thermal treatment. 8th meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE), Kaunas, Litauen, 13.-14.09.2012
  91. Pfriem, A.; Zander, M.: Wood Modification Network in the Baltic Sea Region. 8th meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE), Kaunas, Litauen, 13.-14.09.2012
  92. Dietrich, T.; Pfriem, A.; Buchelt, B.; WagenfĂŒhr, A.: Densification of beech wood: Furfuryl alcohol impregnation for improved plasticization, fixation and properties. „Hardwood Science and Technology” The 5th Conference on Hardwood Research and Utilisation in Europe, 10.-11.09.2012, Sopron, Hungary
  93. Pfriem, A.; Zander, M.: Wood Modification Network in the Baltic Sea Region. SNS 40-years jubilee conference “New challenges for sustainable forestry”, Kopenhagen, DĂ€nemark, 03.-04.07.2012
  94. Pfriem, A.; Zander, M.: Netzwerk zur effizienten und nachhaltigen Holzverarbeitung durch Holzmodifikationsprozesse - Kooperation von Industrie und Forschungseinrichtungen. 2. Brandenburger Holzkonferenz 2012, Wildau, 07.06.2012
  95. Pfriem, A.; Buchelt, B.; Dietrich, T.: Furfuryl alcohol impregnation for improved plasticization and fixation during the densification of wood. COST Action FP0904 Workshop “Current and Future Trends of Thermo-Hydro-Mechanical Modification of Wood Opportunities for new markets? Nancy, France, 26.-28.03.2012
  96. Zauer, M.; Pfriem, A.; WagenfĂŒhr, A.: Alteration of the pore structure and the capillarity of wood due to thermal modification. COST Action FP0904 Workshop “Current and Future Trends of Thermo-Hydro-Mechanical Modification of Wood Opportunities for new markets? Nancy, France, 26.-28.03.2012
  97. Pfriem, A.: Simultaneous shaping and fixation of veneer by specific material modification. COST Early Stage Researchers Forum, Warschau, Polen, 26.09.2011
  98. Herold, N.; Peters, J.; Zauer, M.; Fischer, S.; Pfriem, A.: Improving of the mechanical properties of thermally modified wood by a prior chemical treatment. COST Action FP0802 Workshop “Hierarchical structure and mechanical characterization of wood” Helsinki, Finnland, 24.-25.08.2011
  99. Schwarz, U.; Pfriem, A.: Technologies and manufacturing equipment for the forming of solid wood. COST Action FP0904 Workshop “Thermo-Hydro-Mechanical Wood Behaviour and Processing” Biel, Schweiz, 16.-18.02.2011, S. 99-100
  100. Herold, N.; Pfriem, A.: Simultaneous shaping and fixation of veneer by specific material modification. COST Action FP0904 Workshop “Thermo-Hydro-Mechanical Wood Behaviour and Processing” Biel, Schweiz, 16.-18.02.2011, S. 153-154
  101. Zauer, M.; Pfriem, A.; Hempel, S.; WagenfĂŒhr, A.; Mechtcherine, V.: Investigation of the Pore Structure of Unmodified and Thermally Modified Wood using Gas Pycnometry and Mercury Intrusion Porosimetry. XV. Workshop ĂŒber die Charakterisierung von feinteiligen und porösen Festkörpern. Bad Soden / Ts., 16.-17.11.2010
  102. Peters, J.; Herold, N.; Pfriem, A.: Topochemical investigations of wood and their connection to the alteration of pore structure due to thermal treatment. 4th Joint New Zealand-German Symposium on Plant Cell Walls: “Methodological and Scientific Advances in Plant Cell Wall Research” Hamburg, 10-12.10.2010
  103. Pfriem, A.; Zauer, M.: Investigations to the unsteady sorption behaviour of thermally modified wood and their connection to the alteration of pore structure due to thermal treatment. COST Action FP0802 Workshop “Wood Structure/Function-Relationships”, Hamburg, 5-8.10.2010
  104. Herold, N.; Peters, J.; Zauer, M.; Pfriem, A.; Fischer, S.; WagenfĂŒhr, A.: Influence of a prior chemical treatment on properties of thermally modified wood. 5th European Conference on Wood Modification, Riga, Lettland, 20.-21.09.2010
  105. Pfriem, A.; Buchelt, B.; Zauer, M.; WagenfĂŒhr, A.: Colour differences in thermally modified wood in dependence of the distance from the external side and the modification parameters. 5th European Conference on Wood Modification, Lettland, 20.-21.09.2010, Riga
  106. Zauer, M.; Pfriem, A.: Reinforcement of thermally modified wood for use in highly stressed components of musical instruments. 5th European Conference on Wood Modification, Riga, Lettland, 20.-21.09.2010
  107. Pfriem, A.; Buchelt, B.; Dietrich, T.; Zauer, M.: Revaluation of European hardwood species by a combined modification, compressing and shaping processes. 5th European Conference on Wood Modification, Riga, Lettland, 20.-21.09.2010
  108. Buchelt, B.; Pfriem, A.: Thermisch modifizierte Furniere fĂŒr dekorative Zwecke. Vortrag 6. EuropĂ€ischer TMT-Workshop 2010, Dresden, 6.-7. Mai 2010, Deutschland
  109. Pfriem, A.; WagenfĂŒhr, A.: Biologische MaterialverbĂŒnde und Übertragung in Verbundwerkstoffe. Poster 14. Holztechnologisches Kolloquium, Dresden, 08.-09.04.2010
  110. Pfriem, A.; Zauer, M.; Horbens, M.: Production and characterization of wood fibres with defined properties for their use as reinforcing fibres in wood-polypropylene-composites. Proceedings of the Workshop COST Action FP 0802 “Workshop on single fiber testing and modelling”, Stockholm, Schweden, 4.-5.11.2009, S. 32
  111. Pfriem, A.; WagenfĂŒhr, A.; Zauer, M.: Materialverhalten des Werkstoffes Holz unter dem Aspekt des Musikinstrumentenbaus und Möglichkeiten zu dessen VerĂ€nderung. Vortrag Innovationsforum „Zukunft im Musikinstrumentenbau“, Markneukirchen, Deutschland, 23.06.2009
  112. Zauer, M.; Pfriem, A.: Investigation of the pore structure of wood using nitrogen pycnometry and mercury intrusion porosimetry. Proceedings of the Workshop COST Action FP 0802 “Experimental and computational methods in wood micromechanics”, Wien, Österreich, 11.-13.05.2009, S. 29-30
  113. Zauer, M.; Pfriem, A.: Alteration of the pore structure of spruce and maple due to thermal treatment. Proceedings of the 4th European Conference on Wood Modification, Stockholm, Schweden, 27.-29.04.2009, S. 169-172
  114. Pfriem, A.; Zauer, M.: Alteration of the unsteady sorption behaviour of spruce and maple due to thermal treatment. Proceedings of the 4th European Conference on Wood Modification, Stockholm, Schweden, 27.-29.04.2009, S. 363-370
  115. Peters, J.; Pfriem, A.: Emissions from thermally modified beech, their reduction by solvent extraction and fungicidal effect of the organic solvent extracts. Proceedings of the 4th European Conference on Wood Modification, Stockholm, Schweden, 27.-29.04.2009, S. 345-352
  116. Pfriem, A.; Buchelt, B.; Jahn, R.: Production of thermally modified veneer with high decorative value. Proceedings of the 4th European Conference on Wood Modification, Stockholm, Schweden, 27.-29.04.2009, S. 435-438
  117. Pfriem, A.; Unbehaun, H., Zauer, M.: Bestimmung von Materialkennwerten zur Charakterisierung von Holzwerkstoffen, Vortrag 2. Forschungsforum Modellierung und Prognose von Eigenschaften faserbasierter Produkte, Heidenau, 26.03.2009
  118. Pfriem, A.: Mikroskopische und Rasterelektronenmikroskopische Analysen von thermisch modifizierten Hölzern. Poster 2. Holzanatomisches Kolloquium, Dresden, 30.01.2009
  119. Pfriem, A.; Peters, J.; WagenfĂŒhr, A.; Fischer, K.: Untersuchungen zur qualitativen und quantitativen Erfassung von emittierten Geruchsstoffe in Thermoholzprodukten unter BerĂŒcksichtigung der Feuchteaufnahme und des Feuchtigkeitstransports – In: Tagungsband 5. EuropĂ€ischer TMT-Workshop 2008 und 2. INS-Workshop "Normung und Standardisierung von TMT", Dresden, 24.-25.04.2008
  120. Pfriem, A.: Thermoholz/Holzmodifikation als Chance im Holzbau. Vortrag Podiumsdiskussion „Landesbeirat Holz Sachsen – Handwerkertag Innovativ Bauen und Sanieren mit Holz“, Dresden, 29.02.2008
  121. Pfriem, A.; WagenfĂŒhr, A.; Unbehaun, H.; Kerns, G.: Verfahren zur deutlichen Reduzierung von emittierenden VOC aus „FlĂŒssigholz“ (Arboform). Poster 7. Materialforschungstag des Materialforschungsverbund Dresden e. V., Dresden, 28.11.2007
  122. Pfriem, A.; WagenfĂŒhr, A.: Materialverhalten thermisch modifizierter Hölzer unter besonderer BerĂŒcksichtigung der Anforderungen fĂŒr die Verwendung im Musikinstrumentenbau. Poster 7. Materialforschungstag des Materialforschungsverbund Dresden e. V. Dresden, 28.11.2007
  123. Pfriem, A.; WagenfĂŒhr, A.: Influence of a thermally modification of spruce to unsteady-state sorption processes and wood moisture-dependent elasticity – In: Hill, CAS; Jones, D.; Militz, H.; Ormondroyd, G. [Ed.]: Proceedings of the Third European Conference on Wood Modification, Cardiff, 15.-16.10.2007, S. 367-374
  124. Unbehaun, H.; Pfriem, A.; Kerns, G.; Beyer, M.: Reduction of volatile organic compounds and odour emissions by enzymatic modification of lignin containing materials – In: Hill, CAS; Jones, D.; Militz, H.; Ormondroyd, G. [Ed.]: Proceedings of the Third European Conference on Wood Modification, Cardiff, 15.-16.10.2007, S. 259-262
  125. Pfriem, A.: Möglichkeiten und Grenzen beim Einsatz thermisch modifizierter Hölzer im Bauwesen und in der Restauration. Vortrag Fachtagung „Bauen mit Holz in der Denkmalpflege“, Leipzig, 26.10.2006
  126. Pfriem, A.: Thermische VergĂŒtung von Holz zur Verwendung im Musikinstrumentenbau – physikalische / chemische Analysen. Vortrag Neufelder Instrumentenbauer Congress und Erlebnistage, Neufelden, Österreich, 20.10.2006
  127. Pfriem, A.; WagenfĂŒhr, A.: Use of thermally modified wood for musical instruments – Vortrag International Scientific Conference “Technologies of wood processing”, Zvolen, Slowakei, 19.-20.9.2006
  128. Pfriem, A.: Thermische HolzvergĂŒtung als innovative Zukunftstechnologie – Vortrag 2. Innovationsforum Zukunftswerkstoff Holz des Förderverein Holzbau / Holzwirtschaft e.V., Lichtenstein, 24.11.2005
  129. Pfriem, A.: Thermische Modifizierung von Laubholz – Vortrag zu Tharandter Forstwissenschaftliche Kolloquien: Holzwege in die Zukunft – Wertschöpfungskette Wald – Holz, Tharandt, 22.11.2005
  130. Pfriem, A.; WagenfĂŒhr, A.; Ziegenhals G.; Eichelberger, K.: Use of wood performed by heat-treatment for musical instruments – In: Militz, H., Hill, CAS [Ed.]: Wood modification: Processes, Properties and Commercialisation – The Second European Conference on Wood Modification, Göttingen, 6.-7.10.2005, S. 390-397
  131. Pfriem, A.; WagenfĂŒhr, A.; MĂŒller, M.: Ultraleichte Holzfaserplatten als DĂ€mm– und Leichtbauwerkstoff – Tagungsband 5. Internationales Symposium zu „Werkstoffen aus Nachwachsenden Rohstoffen“, Erfurt, 1.-2.9.2005
  132. WagenfĂŒhr, A.; Pfriem, A.: Elastische Kennwerte thermisch modifizierter und unmodifizierter Holz-Zwillinge. Poster 3. Thermoholzworkshop, Dresden, 02.-03.06.2005
  133. WagenfĂŒhr, A.; Pfriem, A.: Untersuchungen zum Aufschluss von Holz und FlachsschĂ€ben im Extruder zur Herstellung von Holzwerkstoffen. Tagungsband 11. Internationale Chemnitzer Tagung Stoffliche Verwertung nachwachsender Rohstoffe, Chemnitz, 14.-15.10.2004, S. 149-151


d) Nicht begutachtete Veröffentlichungen

  1. Brösel L., Pfriem, A., Clauder, L.: Nachweis gefĂŒhrt – Brandschutzklasse. Bauen mit Holz, 05 (2014), S. 38-40
  2. Pfriem, A.; Ziegenhals, G.: „Holzmodifikation“ – Ein Weg zur Aufwertung von Holz im Musikinstrumentenbau? In: „Musikinstrumentenbauer in Berlin, Brandenburg und Mecklenburg-Vorpommern, 2012
  3. Buchelt, B.; Scheiding, W.; Pfriem, A.; Eichelberger, K.; WagenfĂŒhr, A.: Thermisch modifizierte Furniere fĂŒr dekorative Zwecke. Holz-Zentralblatt 137 (2011) 6, S. 156
  4. Buchelt, B.; Pfriem, A.; WagenfĂŒhr, A.: Farbdifferenzen in thermisch modifizierten Hölzern. Holz-Zentralblatt 136 (2010) 2, S. 58
  5. Unbehaun, H.; Kerns, G.; WagenfĂŒhr, A.; Pfriem, A.; Beyer, M.; Liebner, F.: Arboform im Musikinstrumentenbau: Enzymatische Modifikation zur Reduzierung der Geruchsemissionen und Verbesserung der mechanischen Eigenschaften. Musicon Valley Report 2006, S. 55-58
  6. Pursche, Th.; Pfriem, A.: Temperaturverhalten von ThermoglĂ€ttwerkzeugen. HOB – Die Holzbearbeitung 53 (2006) 3, S. 100-102