Hochschule für nachhaltige Entwicklung Eberswalde
•••
Menü

Prof. Dr.-Ing. Alexander Pfriem

Publications


a) Begutachtete Journal-Veröffentlichungen

  1. Munier, L.F.; Franke,T.; Herold, N.; Pfriem, A.: Humidity’s Effect on the Dynamic-mechanical Behavior of Phenol-formaldehyde Impregnated Beech Wood Veneer. BioResources, 15 (2020) 1, 1563-1574
  2. Popescu, C.-M.; Pfriem, A.: Treatments and modification to improve the reaction to fire of wood and wood based products – an overview. Fire and Materials, 44 (2020) 1, 100-111; DOI: 10.1002/fam.2779
  3. Pfriem, A.: Review – Die Verwendung von Tropenholz im Musikinstrumentenbau - Chancen für alternative Materialien? Holztechnologie. 59 (2018) 5, 15-20
  4. Kampe, A.; Pfriem. A.: A Note on Artificial Weathering of spruce (Picea abies) with a carbonized layer. International Wood Products Journal. 9 (2018) 2, 86-89; https://doi.org/10.1080/20426445.2018.1493841
  5. Franke, T.; Herold, N.; Buchelt, B.; Pfriem, A.: The Potential of Phenol-Formaldehyde as Plasticizing Agent for Moulding Applications of Wood Veneer - Two-Dimensional and Three-Dimensional Moulding. European Journal of Wood and Wood Products. 76 (2018) 5, 1409-1416; DOI: 10.1007/s00107-018-1320-1
  6. Franke, T.; Mund, A.; Lenz, C.; Herold, N.; Pfriem, A.: Microscopic and Macroscopic swelling and dimensional stability of beech wood impregnated with phenol-formaldehyde, ProLigno, 13 (2017) 4, 373-378
  7. Rademacher, P.: Bader, M.; Nemeth, R.; Klimek, P.; Sprdlik, V.; Rousek, R., Cermak, P.; Pfriem, A.; Sanne, M.; Meinlschmidt, P.; Wimmer, R.; Trischler, J.; Sandberg, D.: From native wood to engineered materials, Part 3: engineered hybrid wood-based products, ProLigno, 13 (2017) 4, 361-372
  8. Wulf, F.; Sanne, M.; Pfriem, A.: Coatings for use on wooden bicycle frames – requirements, test methods and artificial weathering results. Drvna industrija – “Wood Industry”, 68 (2017) 4, 281-289
  9. Franke, T.; Lenz, C.; Hertrich, S.; Kuhnert, N.; Kehr, M.; Herold, N.; Pfriem, A.: Künstliche Bewitterung von Buchenfurnier imprägniert mit drei Phenolharzen unterschiedlichen Molekulargewichts. Holztechnologie, 58 (2017) 1, 24-30
  10. Zerbst, D.; Baensch, F.; Pfriem, A.; Niemz, P.: Visko-elastisches Verhalten von Holz-Klebstoff-Verbindungen unter zyklischer Belastung. Bautechnik, 93 (2016) 11, 795-800, DOI: 10.1002/bate.201500102
  11. Baensch, F.; Clauder, L.; Cordes, D.; Melcher, E.; Pfriem, A.: Farbanalyse an thermisch modifizierten und wachsimprägnierten Hölzern nach künstlicher Bewitterung. Holztechnologie, 57 (2016) 2, 23-30
  12. Pfriem, A.: Thermally modified wood for use in musical instruments. Drvna industrija – “Wood Industry”, 66 (2015) 3, 251-253
  13. Herold, N.; Grigsby, W.; Franich, R.; Pfriem, A.: Changes in Stiffness of Wood Veneer during Furfuryl Alcohol Modification. European Journal of Wood and Wood Products, 73 (2015) 5, 693-695, DOI: 10.1007/s00107-015-0941-x
  14. Hughes, M.; Hill, C.A.S.; Pfriem, A.: The toughness of hydrothermally modified wood – A review. Holzforschung, 69 (2015) 7, S. 851-862, DOI: 10.1515/hf-2014-0184
  15. Wulf, F.; Schulz, K.; Brösel, L.; Pfriem, A.: Mineralized wood fibre reinforced concrete as stiffening elements with reduced density. Drvna industrija – “Wood Industry”, 66 (2015) 1, S. 57-62
  16. Zauer, M.; Hempel, S.; Pfriem, A.; Mechtcherine, V.; Wagenführ, A.: Investigations of the pore-size distribution of wood in the dry and wet state by means of mercury intrusion porosimetry. Wood Science and Technology. 48 (2014) 6, S. 1229-1240
  17. Herold, N.; Lenz, C.; Pfriem, A.: Changes in Cell Wall Dimensions during the Different Stages of Furfuryl Alcohol Modification. BioRessources, 9 (2014) 3, S. 4756-4763
  18. Wulf, F.; Barth, H.; Pfriem, A.: Herstellung eines porösen Werkstoffes aus Natriumwasserglas und Holzpartikeln als Schallabsorber in Akustikplatten. Holztechnologie, 55 (2014) 3, S. 26-32
  19. Herold, N.; Pfriem, A.: Shape Retention of Furfurylated and Moulded Wood Veneer. BioResources, 9 (2014) 1, S. 545-553
  20. Shchupakivskyy, R.; Clauder, L.; Linke, N.; Pfriem, A.: Application of high-frequency densitometry to detect changes in early- and latewood density of Oak (Quercus robur L.) due to thermal modification. European Journal of Wood and Wood Products, 72 (2014) 1, S. 5-10
  21. Zauer, M.; Kretzschmar, J.; Großmann, L.; Pfriem, A.; Wagenführ, A.: Analysis of the pore-size distribution and fiber saturation point of native and thermally modified wood using differential scanning calorimetry. Wood Science and Technology, 48 (2014) 1, S. 177-193
  22. Sproßmann, R.; Zauer, M.; Pfriem, A.; Wagenführ, A.: Zum Einfluss der Holzart in Bassgitarrenhälsen auf das Schwingungs- und Klangverhalten. Holztechnologie, 54 (2013) 4, S. 19-25
  23. Zauer, M.; Pfriem, A.; Wagenführ, A.: Toward improved understanding of the cell-wall density and porosity of native and thermally modified wood determined by gas pycnometry. Wood Science and Technology, 47 (2013) 6, S. 1197-1211
  24. Pfriem, A.; Clauder, L.; Linke, N.; Shchupakivskyy, R.: Anwendung der Hochfrequenz-Dichtemessung zur Erfassung der lokalen Dichteänderung von Eichenholz infolge einer thermischen Modifikation. Holztechnologie, 54 (2013) 3, S. 30-34
  25. Pfriem, A.: Fachbereich Holztechnik an der Hochschule für nachhaltige Entwicklung Eberswalde (FH). Holztechnologie, 54 (2013) 4, S. 56-57
  26. Herold, N., Pfriem, A.: Impregnation of Veneer with Furfuryl Alcohol for an Improved Plasticization and Moulding. European Journal of Wood and Wood Products, 71 (2013) 2, S. 281-282
  27. Herold, N.; Dietrich, T.; Grigsby, W.; Franich, R.; Winkler, A.; Buchelt, B.; Pfriem, A.: Effect of Maleic Anhydride Content and Ethanol Dilution on the Polymerization of Furfuryl Alcohol in Wood Veneer Studied by Differential Scanning Calorimetry. BioResources 8 (2013) 1, S. 1064-1075
  28. Horbens, M.; Pfriem, A.; Ganster, J.; Wagenführ, A.: Herstellung und Charakterisierung von Holzfasern definierter Eigenschaften für deren Verwendung als Verstärkungsfasern in Holz-Polypropylen-Verbundwerkstoffen. Holztechnologie, 53 (2012) 6, S. 21-25
  29. Buchelt, B.; Pfriem, A.; Wagenführ, A.: Investigations of the compressive behavior of veneer in thickness direction. Drvna industrija – “Wood Industry”, 63 (2012) 1, S. 33-36
  30. Pfriem, A., Dietrich, T., Buchelt, B.: Furfuryl alcohol impregnation for improved plasticization and fixation during the densification of wood. Holzforschung, 66 (2012) 2, S. 215-218
  31. Pfriem, A.: Alteration of water absorption coefficient of spruce (Picea abies (L.) Karst.) due to thermal modification. Drvna industrija – “Wood Industry”, 62 (2011) 4, 311-313
  32. Buchelt, B.; Pfriem, A.: Influence of wood specimen thickness on its mechanical properties by tensile testing – solid wood versus veneer. Holzforschung, 65 (2011) 2, S. 249-252
  33. Buchelt, B.; Pfriem, A.; Wagenführ, A.; Scheiding, W.: Thermisch modifizierte Furniere für dekorative Zwecke. Holztechnologie 52 (2011) 1, S. 16-21
  34. Pfriem, A.; Buchelt, B.: Influence of the slicing technique on mechanical properties of the produced veneer. European Journal of Wood and Wood Products 69 (2011) 1, S. 93-99
  35. Pfriem, A.; Buchelt, B.; Zauer, M.; Wagenführ, A.: Comparative analysis of thermally modified and native spruce loaded perpendicular to the grain. European Journal of Wood and Wood Products, 68 (2010) 3, S. 267-270
  36. Scholz, G.; Zauer, M.; van den Bulcke, J.; van Loo, D.; Krause, A.; Pfriem, A.; van Acker, J.; Militz, H.: Investigation on wax-impregnated wood. Part 2: Study of void spaces filled with air by He pycnometry, Hg intrusion porosimetry, and 3D X-ray imaging. Holzforschung, 64 (2010) 5, S. 587–593
  37. Pfriem, A.; Zauer, M.; Wagenführ, A.: Alteration of the unsteady sorption behaviour of maple (Acer pseudoplatanus L.) and spruce (Picea abies (L.) Karst.) due to thermal modification. Holzforschung, 64 (2010) 2, S. 235-241
  38. Peters, J.; Pfriem, A.; Horbens, M.; Fischer, S.; Wagenführ, A.: Emissions from thermally modified beech wood, their reduction by solvent extraction and fungicidal effect of the organic solvent extracts. Wood Material Science and Engineering, 4 (2009) 1, S. 61-66
  39. Pfriem, A.; Horbens, M.; Beyer, M.; Peters, J.: Untersuchung von Extraktstoffen aus thermisch modifizierter Rotbuche (Fagus sylvatica L.) auf ihre fungizide Wirkung. Holztechnologie 50 (2009) 2, S. 32-36
  40. Pfriem, A.; Zauer, M.; Wagenführ, A.: Alteration of the pore structure of spruce (Picea abies (L.) Karst.) and maple (Acer pseudoplatanus L.) due to thermal treatment as determined by helium pycnometry and mercury intrusion porosimetry. Holzforschung, 63 (2009) 1, S. 94-98
  41. Pfriem, A.; Zauer, M.; Oertel, M.; Wagenführ, A.: Vergleichende Untersuchungen zur Zerspanbarkeit von ligninbasierenden Werkstoffen, mitteldichten Faserplatten sowie Spanplatten. Holz als Roh- und Werkstoff, 66 (2008) 5, S. 379-380
  42. Pfriem, A.; Wagenführ, A.: Feuchtigkeitsabhängigkeit des Elastizitätsmoduls thermisch modifizierter und nativer Fichte (Picea abies (L.) Karst.). Holz als Roh- und Werkstoff, 66 (2008) 1, S. 77-79
  43. Pfriem, A.; Grothe, T.; Wagenführ, A.: Einfluss der thermischen Modifikation auf das instationäre Sorptionsverhalten von Fichte (Picea abies (L.) Karst.). Holz als Roh- und Werkstoff, 65 (2007) 4, S. 321-323
  44. Pfriem, A.; Eichelberger, K.; Wagenführ, A.: Acoustic properties of thermally modified spruce for use for violins. Journal of the Violin Society of America: VSA-Paper 21 (2007) 1, S. 102-111
  45. Wagenführ, A.; Pfriem, A.; Grothe, T.; Eichelberger, K.: Untersuchungen zur vergleichenden Charakterisierung von thermisch modifizierter Fichte für Resonanzdecken von Gitarren. Holz als Roh- und Werkstoff, 64 (2006) 4, S. 313-316
  46. Wagenführ, A.; Buchelt, B.; Pfriem, A.: Material Behaviour of Veneer during multidimensional Moulding. Holz- als Roh- und Werkstoff, 64 (2006) 2, S. 83-89
  47. Cong, N.T.; Pfriem, A.; Wagenführ, A.: Alternatives Verfahren zur Zerfaserung von Einjahrespflanzen für die Herstellung von Faserwerkstoffen für klein- und mittelständische Unternehmen, Teil 2 Werkstoffherstellung und -eigenschaften. Holztechnologie 47 (2006) 6, S. 18-25
  48. Cong, N.T.; Pfriem, A.; Wagenführ, A.: Alternatives Verfahren zur Zerfaserung von Einjahrespflanzen für die Herstellung von Faserwerkstoffen für klein- und mittelständische Unternehmen, Teil 1 Vorstellung des Zerfaserungsprozesses. Holztechnologie 47 (2006) 4, S. 11-15
  49. Wagenführ, A.; Pfriem, A.; Eichelberger, K.: Der Einfluss einer thermischen Modifikation von Holz auf einige im Musikinstrumentenbau relevanten Eigenschaften – Teil 2 technologische Eigenschaften, Herstellung und Prüfung von Musikinstrumentenbauteilen. Holztechnologie 47 (2006) 1, S. 40-44
  50. Wagenführ, A.; Pfriem, A.; Eichelberger, K.: Der Einfluss einer thermischen Modifikation von Holz auf einige im Musikinstrumentenbau relevanten Eigenschaften – Teil 1 ausgewählte anatomische und physikalische Eigenschaften. Holztechnologie 46 (2005) 4, S. 36-42
  51. Wagenführ, A.; Pfriem, A.; Tech, S.: Untersuchungen zum Aufschluss von Holz und Flachsschäben im Extruder zur Herstellung von Holzwerkstoffen. Holz als Roh- und Werkstoff 62 (2004) 3; S. 237-238


b) Eingereichte Manuskripte

  1. Sanne, M.; Kampe, A.; Lenz, C.; Gossel, S.; Wagner, S.; Haibel, A.; Melcher, E.; Pfriem, A., Lautner, S.: Anatomical studies of wood treated with pressure pulse shock waves. International Wood Products Journal
  2. Franke,T.; Herold, N.; Pfriem, A.: The effect of temperature on the dynamic-mechanical behaviour of phenol-formaldehyde impregnated beech wood veneer. BioResources


c) Konferenzbeiträge / Buchbeiträge

  1. Bansamir, L.; Wulf, F.; Brodhagen, T., Pfriem, A.: Surface coating of pyrolyzed and native wood surfaces with calcium carbonate crystals by biomineralization. 15th annual meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE), 09-10.10.2019, Lund, Schweden
  2. Sanne, M.; Makowski, S.; Ahn-Ercan, G.; Pfriem, A.: Springback effect on laminated beech sheets/stacks. 15th annual meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE), 09-10.10.2019, Lund, Schweden
  3. Munk, C.; Clauder, L.; Pfriem, A.: Sound absorption coefficient of thermally modified and unmodified wood species measured in an impedance tube. 15th annual meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE), 09-10.10.2019, Lund, Schweden
  4. Kampe, A.; Clauder, L.; Pfriem, A.: Application of chemical buffers to prevent and reduce VOC-emissions of different wood species. 15th annual meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE), 09-10.10.2019, Lund, Schweden
  5. Bender, T.; Clauder, L.; Pfriem, A.: Comparison of different recipes for thermal modification of European tone wood and their influence on the acoustic behavior. 15th annual meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE), 09-10.10.2019, Lund, Schweden
  6. Mund, A.; Munier, L.F.; Franke, T.; Herold, N.; Pfriem, A.: Investigating the shape stability of moulded phenol-formaldehyde modified beech veneers by means of digital image correlation. 21st International Nondestructive Testing and Evaluation of Wood Symposium, Freiburg, 24.-27.09.2019
  7. Pfriem, A.; Wulf, F.; Brodhagen, T.: Das Brandverhalten von Holz und dessen Prüfung. Symposium Brandsicherheit und Gefährdungspotential im Kontext neuartiger innovativer Bauweisen und Produkte, Wildau, 09.05.2019
  8. Zauer, M.; Pfriem, A.: Tropical hardwood in musical instruments and case studies to their substition by modified wood. In: Marco A. Pérez [Hrsg.]: Book of End of WoodMusICK COST Action FP1302 Wooden Musical Instruments: Different Forms of Knowledge. 2018
  9. Gossel, S.; Sanne, M.; Wagner, S.; Pfriem, A.; Lautner, S.; Leu, C.: Pressure pulse impregnation process using high voltage technology - Generation of electrohydraulic discharges to improve treatability of softwoods with impregnating liquid. VDE-Hochspannungstage, Berlin, 12.-14.11.2018
  10. Munk, C.; Clauder, L.; Pfriem, A.: Acoustical comparison of two different guitars, made of untreated tropical wood and thermally modified wood, using a frequency response analysis. 14th annual meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE), 02-03.10.2018, Tallinn, Estland
  11. Sanne, M.; Kampe, A.; Leonard, M.; Herold, N.; Pfriem, A.: Bambulator – an example of sustainable bioeconomy. 14th annual meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE), 02-03.10.2018, Tallinn, Estland
  12. Bender, T.; Clauder, L.; Krüger, R.; Pfriem, A.: Frequency-response-determination of tonewood as an alternative to modal analysis.14th annual meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE), 02-03.10.2018, Tallinn, Estland
  13. Pfriem, A.: Chapter 5.5.5. Pyrolysis Machine. In: Zeinali D., Kolaitis, D.I. [Hrsg.] Guide for Obtaining Data from Reaction to Fire Tests. COST FP 1404, 2018
  14. Báder, M.; Bak, M.; Németh, R.; Rademacher, P.; Rousek, R.; Horníček, S.; Dömény, J.; Klímek, P.; Kudela, J.; Sandberg, D.; Neyses, B.; Kutnar, A.; Wimmer, R.; Pfriem, A.: Wood Densification processing for newly engineered materials. Proceedings of the 5th International Conference on Processing Technologies for the Forest and Bio-based Products Industries (PTF BPI 2018) Freising/Munich, 20.-21.09.2018
  15. Zerbst, D.; Clauder, L.; Olson, D.; Pfriem, A.: Influence on acoustical properties of resonant soundboard material through different processes of thermal modification. 9th European Conference on Wood Modification, Arnhem, Netherland, 17.-18.09.2018
  16. Hertrich, S.; Clauder, L.; Lautner, S.; Pfriem, A.: Comparative studies on the biological durability of identical thermally modified wood from field and laboratory tests. 9th European Conference on Wood Modification, Arnhem, Netherland, 17.-18.09.2018
  17. Munier, L.F.; Franke, T.; Herold, N.; Pfriem, A.: The effect of humidity on the dynamic-mechanical behaviour of phenol-formaldehyde impregnated beech wood veneer. 9th European Conference on Wood Modification, Arnhem, Netherland, 17.-18.09.2018
  18. Pfriem, A.: Tropenholzproblematik im Musikinstrumentenbau, Chancen für alternative Materialien? 18. Holztechnologisches Kolloquium, Dresden, 12.-13.04.2018
  19. Pfriem, A.: Neue Fensterhölzer durch Holzmodifikation: Accoya, Thermoholz, Furfurylierung, Bautec Fenster-Fachtagung 2018 „Neue Techniken – Neue Werkstoffe“, 21.2.2018, Berlin
  20. Franke, T.; Mund, A.; Lenz, C.; Herold, N.; Pfriem, A.: Microscopic and Macroscopic swelling and dimensional stability of beech wood impregnated with phenol-formaldehyde, Conference Wood Science and Engineering in the third Millennium, 2-4.11.2017, Brasov, Romania
  21. Rademacher, P.: Bader, M.; Nemeth, R.; Klimek, P.; Sprdlik, V.; Rousek, R., Cermak, P.; Pfriem, A.; Sanne, M.; Meinlschmidt, P.; Wimmer, R.; Trischler, J.; Sandberg, D.: From native wood to engineered materials, Part 3: engineered hybrid wood-based products, Conference Wood Science and Engineering in the third Millennium, 2-4.11.2017, Brasov, Romania
  22. Sanne, M.;  Kampe, A.; Lenz, C.; Gossel, S.; Wagner, S.;  Haibel, A.; Melcher, E.; Pfriem, A., Lautner, S.: Anatomical studies of wood treated with pressure pulse shock waves. 13th annual meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE), 28-29.09.2017, Copenhagen, Denmark
  23. Clauder, L.; Stephan, J.-P.; Pfriem, A.: Products made of thermally modified timber and tested especially for applications in Asiatic countries. 13th annual meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE), 28-29.09.2017, Copenhagen, Denmark
  24. Kampe, A.; Murr, J.; Peters, T.; Günther, M.T.; Pfriem, A.: Artificial weathering of spruce (pieca abies) with carbonized covering layer. 13th annual meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE), 28-29.09.2017, Copenhagen, Denmark
  25. Franke, T.; Herold, N.; Kampe, A.; Pfriem, A.: Use of Phenolic Resins for Hardwood Veneer Modification for Moulding Applications. International Scientific Conference on Hardwood Processing, 25-28.09.2017, Lahti, Finland
  26. Shchupakivskyy, R.; Pfriem, A.: The short-term wood creep test by means of DMA. COST FP1402 Conference, 13.-15.09.2017, Graz, Austria
  27. Clauder, L.; Montibus , M.; Kuttnik, M.; Pfriem, A.: Analysis of wood-destroying fungi in TMT samples. COST FP1303 Final Conference, 6-7.09.2017, Zagreb, Croatia
  28. Nölting, B.; Pape, J.; Dembski, N.; Kräusche, K.; Lehmann, K.; Molitor, H.; Pfriem, A.; Walk, H.: ‘Third mission’ and ‘transfer’ as impetus for sustainable universities – The transfer strategy of the Eberswalde University for Sustainable Development. IST Conference 2017- The 8th International Sustainability Transitions Conference: Taking the lead in real world transitions, 18-21.06.2017 , Gothenburg, Sweden
  29. Zauer, M.; Kretzschmar, J.; Pfriem, A.; Wagenführ, A.: Determination of hygroscopic properties of wood by means of differential scanning calorimetry. 1st Journal of Thermal Analysis and Calorimetry Conference and 6th V4 Thermoanalytical Conference. 06.-09.06.2017, Budapest, Hungary
  30. Pfriem, A.: Potenziale von Naturfasern für den Leichtbau. Konferenz Kunststoff trifft Holz, 16.03.2017, Eberswalde
  31. Clauder, L.; Mansour, E.; Ormondroyd, G.; Pfriem, A.: missions from bio-based building products. COST ACTION FP1303 Workshop / Management Committee Meeting “Design, Application and Aesthetics of biobased building materials” 28.-01.03.2017, Sofia, Bulgaria
  32. Pfriem, A.: Modification Methods and their relation to reaction to fire. MC and WG meetings COST Action FP1404, 02.-03.02.2017, Prague, Czech Republic
  33. Pfriem, A.: Umgang mit geschützten tropischen Hölzern. Vortrag „Musik und Technik – Feinmechanik made in Brandenburg“, 18.01.2017, Musikmuseum Beeskow
  34. Pfriem, A.: Holz als Rohstoff für innovative biobasierte Produkte. Vortrag 2 Innovationsakademie Lignocellulose. Berlin, 08.11.2016
  35. Pfriem, A., Zerbst, D.; Clauder, L.: "Thermo Treated Tonewood - Vintage Vibe or Voodoo?" EGB Symposium and The Holy Grail Guitar Show 2016, 07.10.2016, Berlin
  36. Stenzel, M., Sanne, M., Larnøy, E., Treu, A., Herold, N., Pfriem, A.: Development of a test setup for the dynamic mechanical analysis of wood samples in tensile strength mode. 12th annual meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE), Riga, Latvia, 12-13.09.2016
  37. Kampe, A., Franke, T., Herold, N., Pfriem, A.: Curing behavior of phenolic resins in beech veneer (Fagus sylvatica L.). 12th annual meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE), Riga, Latvia, 12-13.09.2016
  38. Zauer, M.; Pfriem, A.; Wagenführ, A.: Investigations towards dynamic properties of modified Sycamore maple for utilization as highly stressed tonewood. Hardwood Conference, Sopron, Ungarn, 08.-09.09.2016
  39. Franke, T.; Lenz, C.; Pfriem, A.; Herold, N.: Improving the plasticization and form stability of wood veneer by phenol/formaldehyde modification. World Conference on Timber Engineering, Wien, Österreich, 22.-25.08.2016
  40. Blomqvist, L.; Pfriem, A.; Johansson, J.: Temporary buildings in reusable lightweight material. World Conference on Timber Engineering, Wien, Österreich, 22.-25.08.2016
  41. Zauer, M.; Pfriem, A.: Einsatz thermisch modifizierter Hölzer im Musikinstrumentenbau. 9. Europäischer TMT-Workshop, Dresden, 26.-27. Mai. 2016
  42. Pfriem, A.: Holz - ein Konstruktionswerkstoff der Zukunft. Vortrag VDI Bezirksverband Berlin Brandenburg, Berlin, 19.05.2016
  43. Franke, T.; Lenz, C.; Kehr, M.; Kuhnert, N.; Munier, L. F.; Schultz, M.; Hertrich, S.; Herold, N.: Pfriem, A.: Künstliche Bewitterung von phenolharzimrägniertem Buchenfunier (Fagus sylvatica). Poster, 17. Holztechnologisches Kolloquium, Dresden, 28.-29.04.2016
  44. Pfriem, A.; Ibisch, P.: Perspektiven und Konzepte zum Promotionsrecht für Fachhochschulen in Brandenburg. In: Engelfried, C.; Ibisch, P. (Hg.) Am Wendepunkt? Promovieren an und mit Hochschulen für Angewandte Wissenschaften. Barbara Budrich Verlag, 2016
  45. Zerbst, D.; Horbelt, N.; Brodhagen, T.; Stegmann, F.; Brösel, L.; Pockrandt, M.; Herold, N.; Pfriem, A.: Influence of Wood Species on the Melting Behaviour of Waxes Investigated by Differential Scanning Calorimetry. 8th European Conference on Wood Modification, Helsinki, Finnland, 26.-27.10.2015
  46. Kampe, A.; Herold, N.; Pfriem, A.: Impact of wood species on furfuryl alcohol modification studied by DSC. 8th European Conference on Wood Modification, Helsinki, Finnland, 26.-27.10.2015
  47. Clauder, L.; Mansour, E.; Ormondroyd, G.; Pfriem, A.: Emissions based metal corrosion due to native and chemically modified timber. 8th European Conference on Wood Modification, Helsinki, Finnland, 26.-27.10.2015
  48. Pfriem, A.; Herold, N.: Simultaneous Moulding and Fixation of Veneer by Furfuryl Alcohol Modification. Thermosets 2015: from Monomers to Components, Berlin; Deutschland, 16.-18.09.2015
  49. Baensch, F.; Cordes, D.; Melcher, E.; Pfriem, A.: Accelerated weathering tests on thermally modified and wax-impregnated wood, 11th annual meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE), Poznan, Poland. 14-15.09.2015
  50. Pfriem, A.: Holz - ein Konstruktionswerkstoff der Zukunft - Von der Idee zur Entwicklung und Vermarktung des „Wooden E-Bike“, IndustrieKonferenz Brandenburg, Cottbus, 02.07.2015
  51. Lübke, L.; Hill, C.A.S.; Pfriem, A.: Bound water in small wood samples investigated by low-field nuclear magnetic resonance. 10th meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE), Edinburgh, Scotland, 13.-14.10.2014
  52. Franke, T.; Clauder, L.; Pfriem, A.: Using wood as display case material for museums – an approach for the production of low-emission wood. 10th meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE), Edinburgh, Scotland, 13.-14.10.2014
  53. Clauder, L.; Pfriem, A.: Comparative durability tests on TMT Beech – preliminary results. 10th meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE), Edinburgh, Scotland, 13.-14.10.2014
  54. Horbelt, N.; Bertinetti, L.; Fratzl, P.; Pfriem, A.; Eder, M.: The combined influence of varying microfibril angle and relative humidity on the tensile stiffness of single spruce fibers. International symposium WoodSciCraft 2014 “Wood Science and Craftsmanship: Cross perspective between Europe and Japan”. Montpellier, France, 8.-12.09.2014
  55. Clauder, L.; Pfriem, A.: Qualitätssicherung –Vorhersagbarkeit der Dauerhaftigkeit von TMT. 8. Europäischer Thermoholz Workshop, 22.-23.05.2014, Dresden
  56. Pfriem, A.: Thermally modified wood for use in musical instruments – a review. Final Cost Action FP0904 Conference “Recent Advances in the Field of TH and THM Wood Treatment” 19.-21.05.2014, Skellefteå, Sweden
  57. Clauder; L., Pfriem, A.: Comparative durability tests on TMT Beech – preliminary results. Final Cost Action FP0904 Conference “Recent Advances in the Field of TH and THM Wood Treatment” 19.-21.05.2014, Skellefteå, Sweden
  58. Clauder, L.; Pfriem, A.: Emissions from thermally modified wood. Final Cost Action FP0904 Conference “Recent Advances in the Field of TH and THM Wood Treatment” 19.-21.05.2014, Skellefteå, Sweden
  59. Brösel, L.; Clauder, L.; Pfriem, A.: Flammability tests on thermally modified and untreated timbers. Final Cost Action FP0904 Conference “Recent Advances in the Field of TH and THM Wood Treatment” 19.-21.05.2014, Skellefteå, Sweden
  60. Shchupakivskyy, R.; Pfriem, A.; Clauder, L.: Statistical simulation of wood density changes due to thermal treatment. 7th European Conference on Wood Modification, Lissabon, Portugal, 10.-12.03.2014
  61. Pfriem, A.; Clauder, L.; Linke, N.; Shchupakivskyy, R.: Application of high-frequency densitometry to detect changes in early- and latewood density of oak (Quercus robur L.) due to thermal modification. 7th European Conference on Wood Modification, Lissabon, Portugal, 10.-12.03.2014
  62. Clauder, L.; Pfriem, A.; Rådemar M.; Rosell, L.; Vestergren M.: Emissions from TMT products. 7th European Conference on Wood Modification, Lissabon, Portugal, 10.-12.03.2014
  63. Herold, N.; Lenz, C.; Pfriem, A.: Changes in Cell Wall Dimensions during the Different Stages of Furfuryl Alcohol Modification. 7th European Conference on Wood Modification, Lissabon, Portugal, 10.-12.03.2014
  64. Herold, N.; Pfriem, A.: Simultaneous moulding and fixation of veneer by specific material modification. 7th European Conference on Wood Modification, Lissabon, Portugal, 10.-12.03.2014
  65. Pfriem, A.; Wulf, F.: Research with musical instruments at University of Applied Sciences Eberswalde. COST Action FP1302 opening conference, Paris, Frankreich, 27.-28.02.2014
  66. Clauder, L.; Rådemar, M.; Rosell, L.; Vestergren, M.; Pfriem, A.: Emissions from TMT products. COST FP0904 & FP1006 Meeting, Rogla, Slovenia, 16.-18.Oktober 2013
  67. Herold, N.; Pfriem, A.: Set-recovery of furfurylated and shaped veneer. 9th meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE), Hannover, Germany, 11.-12.09.2013
  68. Maksymiv, V.; Pfriem, A.; Shchupakivskyy, R.; Clauder, L.; Kijko, O.; Andrashek, J.: Statistical simulation of wood density changes due to thermal treatment. XXI. Symposium Adhesives in Woodworking Industry, Zvolen, Slovakia, 26-28 June 2013
  69. Clauder, L.; Richter S.; Unger, W.; Pfriem. A.: Application of a model for the prediction of fungal degradation of thermally modified timber by Trametes versicolor. International Research Group on Wood Protection 44rd Annual Meeting, Stockholm, Sweden, 16-20 June 2013
  70. Pfriem, A.; Zander, M.; Clauder, L.: Baltic Sea network for efficient and sustainable wood processing based on wood modification processes. COST Action FP0904 Workshop “Evaluation, processing and predicting of THM treated wood behaviour by experimental and numerical methods”, Iasi, Romania, 09.-11. April 2013
  71. Clauder, L.; Pfriem, A.: Determination of dimensional stability of thermally modified beech and spruce wood. COST Action FP0904 Workshop “Evaluation, processing and predicting of THM treated wood behaviour by experimental and numerical methods”, Iasi, Romania, 09.-11. April 2013
  72. Herold, N.; Dietrich, T.; Grigsby, W.; Franich, R.; Winkler, A.; Buchelt, B.; Pfriem, A.: Effects of Maleic Anhydride on the Curing of Furfuryl Alcohol in Wood Veneer Studied by Differential Scanning Calorimetry. Workshop “Micro Characterisation of Wood Material & Properties”, Edinburgh, Scotland, 24.-26. Oktober 2012
  73. Pfriem, A.; Zander, M.: Network for efficient and sustainable wood processing based on wood modification processes. Workshop “Micro Characterisation of Wood Material & Properties”, Edinburgh, Scotland, 24.-26. Oktober 2012
  74. Zauer, M.; Pfriem, A.; Dietrich, T.; Wagenführ, A.: Investigation of the pore structure of native and thermally modified wood using thermoporosimetry. Workshop “Micro Characterisation of Wood Material & Properties”, Edinburgh, Scotland, 24.-26. Oktober 2012
  75. Pfriem, A.: Holzkundliche Untersuchungen zu Veränderungen im Holz während der thermischen Modifizierung – Application of High-Frequency Densitometry to detect Changes in Early- and Latewood Density of Oak (Quercus robur L.) due to Thermal Modification. 2. Dresdner Holzanatomisches Kolloquium, Dresden, 18.-19. Oktober 2012
  76. Herold, N.; Dietrich, T.; Grigsby, W.; Buchelt, B.; Franich, R.; Pfriem, A.: Effects of Different Process Parameters on the Polymerisation of Furfuryl Alcohol in Wood Studied by DSC. 6th European Conference on Wood Modification, Ljubljana, Slowenien, 16-18.09.2012
  77. Herold, N.; Pfriem, A.: Impregnation of Veneer with Furfuryl Alcohol for an Improved Plasticization and Moulding. 6th European Conference on Wood Modification, Ljubljana, Slowenien, 16-18.09.2012
  78. Zauer, M.; Pfriem, A.; Wagenführ, A.: Alteration of the pore structure and the capillarity of wood due to thermal modification. 6th European Conference on Wood Modification, Ljubljana, Slowenien, 16-18.09.2012
  79. Dietrich, T.; Buchelt, B.; Pfriem, A.: Properties of Furfuryl Alcohol modified and densified Beech wood (Fagus Sylvatica L.). 6th European Conference on Wood Modification, Ljubljana, Slowenien, 16-18.09.2012
  80. Clauder, L.; Shchupakivskyy, R.; Pfriem, A.: Application of High-Frequency Densitometry to detect the change in Early- and Latewood Density of Oak (Quercus Robur L.) due to thermal treatment. 8th meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE), Kaunas, Litauen, 13.-14.09.2012
  81. Pfriem, A.; Zander, M.: Wood Modification Network in the Baltic Sea Region. 8th meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE), Kaunas, Litauen, 13.-14.09.2012
  82. Dietrich, T.; Pfriem, A.; Buchelt, B.; Wagenführ, A.: Densification of beech wood: Furfuryl alcohol impregnation for improved plasticization, fixation and properties. „Hardwood Science and Technology” The 5th Conference on Hardwood Research and Utilisation in Europe, 10.-11.09.2012, Sopron, Hungary
  83. Pfriem, A.; Zander, M.: Wood Modification Network in the Baltic Sea Region. SNS 40-years jubilee conference “New challenges for sustainable forestry”, Kopenhagen, Dänemark, 03.-04.07.2012
  84. Pfriem, A.; Zander, M.: Netzwerk zur effizienten und nachhaltigen Holzverarbeitung durch Holzmodifikationsprozesse - Kooperation von Industrie und Forschungseinrichtungen. 2. Brandenburger Holzkonferenz 2012, Wildau, 07.06.2012
  85. Pfriem, A.; Buchelt, B.; Dietrich, T.: Furfuryl alcohol impregnation for improved plasticization and fixation during the densification of wood. COST Action FP0904 Workshop “Current and Future Trends of Thermo-Hydro-Mechanical Modification of Wood Opportunities for new markets? Nancy, France, 26.-28.03.2012
  86. Zauer, M.; Pfriem, A.; Wagenführ, A.: Alteration of the pore structure and the capillarity of wood due to thermal modification. COST Action FP0904 Workshop “Current and Future Trends of Thermo-Hydro-Mechanical Modification of Wood Opportunities for new markets? Nancy, France, 26.-28.03.2012
  87. Pfriem, A.: Simultaneous shaping and fixation of veneer by specific material modification. COST Early Stage Researchers Forum, Warschau, Polen, 26.09.2011
  88. Herold, N.; Peters, J.; Zauer, M.; Fischer, S.; Pfriem, A.: Improving of the mechanical properties of thermally modified wood by a prior chemical treatment. COST Action FP0802 Workshop “Hierarchical structure and mechanical characterization of wood” Helsinki, Finnland, 24.-25.08.2011
  89. Schwarz, U.; Pfriem, A.: Technologies and manufacturing equipment for the forming of solid wood. COST Action FP0904 Workshop “Thermo-Hydro-Mechanical Wood Behaviour and Processing” Biel, Schweiz, 16.-18.02.2011, S. 99-100
  90. Herold, N.; Pfriem, A.: Simultaneous shaping and fixation of veneer by specific material modification. COST Action FP0904 Workshop “Thermo-Hydro-Mechanical Wood Behaviour and Processing” Biel, Schweiz, 16.-18.02.2011, S. 153-154
  91. Zauer, M.; Pfriem, A.; Hempel, S.; Wagenführ, A.; Mechtcherine, V.: Investigation of the Pore Structure of Unmodified and Thermally Modified Wood using Gas Pycnometry and Mercury Intrusion Porosimetry. XV. Workshop über die Charakterisierung von feinteiligen und porösen Festkörpern. Bad Soden / Ts., 16.-17.11.2010
  92. Peters, J.; Herold, N.; Pfriem, A.: Topochemical investigations of wood and their connection to the alteration of pore structure due to thermal treatment. 4th Joint New Zealand-German Symposium on Plant Cell Walls: “Methodological and Scientific Advances in Plant Cell Wall Research” Hamburg, 10-12.10.2010
  93. Pfriem, A.; Zauer, M.: Investigations to the unsteady sorption behaviour of thermally modified wood and their connection to the alteration of pore structure due to thermal treatment. COST Action FP0802 Workshop “Wood Structure/Function-Relationships”, Hamburg, 5-8.10.2010
  94. Herold, N.; Peters, J.; Zauer, M.; Pfriem, A.; Fischer, S.; Wagenführ, A.: Influence of a prior chemical treatment on properties of thermally modified wood. 5th European Conference on Wood Modification, Riga, Lettland, 20.-21.09.2010
  95. Pfriem, A.; Buchelt, B.; Zauer, M.; Wagenführ, A.: Colour differences in thermally modified wood in dependence of the distance from the external side and the modification parameters. 5th European Conference on Wood Modification, Lettland, 20.-21.09.2010, Riga
  96. Zauer, M.; Pfriem, A.: Reinforcement of thermally modified wood for use in highly stressed components of musical instruments. 5th European Conference on Wood Modification, Riga, Lettland, 20.-21.09.2010
  97. Pfriem, A.; Buchelt, B.; Dietrich, T.; Zauer, M.: Revaluation of European hardwood species by a combined modification, compressing and shaping processes. 5th European Conference on Wood Modification, Riga, Lettland, 20.-21.09.2010
  98. Buchelt, B.; Pfriem, A.: Thermisch modifizierte Furniere für dekorative Zwecke. Vortrag 6. Europäischer TMT-Workshop 2010, Dresden, 6.-7. Mai 2010, Deutschland
  99. Pfriem, A.; Wagenführ, A.: Biologische Materialverbünde und Übertragung in Verbundwerkstoffe. Poster 14. Holztechnologisches Kolloquium, Dresden, 08.-09.04.2010
  100. Pfriem, A.; Zauer, M.; Horbens, M.: Production and characterization of wood fibres with defined properties for their use as reinforcing fibres in wood-polypropylene-composites. Proceedings of the Workshop COST Action FP 0802 “Workshop on single fiber testing and modelling”, Stockholm, Schweden, 4.-5.11.2009, S. 32
  101. Pfriem, A.; Wagenführ, A.; Zauer, M.: Materialverhalten des Werkstoffes Holz unter dem Aspekt des Musikinstrumentenbaus und Möglichkeiten zu dessen Veränderung. Vortrag Innovationsforum „Zukunft im Musikinstrumentenbau“, Markneukirchen, Deutschland, 23.06.2009
  102. Zauer, M.; Pfriem, A.: Investigation of the pore structure of wood using nitrogen pycnometry and mercury intrusion porosimetry. Proceedings of the Workshop COST Action FP 0802 “Experimental and computational methods in wood micromechanics”, Wien, Österreich, 11.-13.05.2009, S. 29-30
  103. Zauer, M.; Pfriem, A.: Alteration of the pore structure of spruce and maple due to thermal treatment. Proceedings of the 4th European Conference on Wood Modification, Stockholm, Schweden, 27.-29.04.2009, S. 169-172
  104. Pfriem, A.; Zauer, M.: Alteration of the unsteady sorption behaviour of spruce and maple due to thermal treatment. Proceedings of the 4th European Conference on Wood Modification, Stockholm, Schweden, 27.-29.04.2009, S. 363-370
  105. Peters, J.; Pfriem, A.: Emissions from thermally modified beech, their reduction by solvent extraction and fungicidal effect of the organic solvent extracts. Proceedings of the 4th European Conference on Wood Modification, Stockholm, Schweden, 27.-29.04.2009, S. 345-352
  106. Pfriem, A.; Buchelt, B.; Jahn, R.: Production of thermally modified veneer with high decorative value. Proceedings of the 4th European Conference on Wood Modification, Stockholm, Schweden, 27.-29.04.2009, S. 435-438
  107. Pfriem, A.; Unbehaun, H., Zauer, M.: Bestimmung von Materialkennwerten zur Charakterisierung von Holzwerkstoffen, Vortrag 2. Forschungsforum Modellierung und Prognose von Eigenschaften faserbasierter Produkte, Heidenau, 26.03.2009
  108. Pfriem, A.: Mikroskopische und Rasterelektronenmikroskopische Analysen von thermisch modifizierten Hölzern. Poster 2. Holzanatomisches Kolloquium, Dresden, 30.01.2009
  109. Pfriem, A.; Peters, J.; Wagenführ, A.; Fischer, K.: Untersuchungen zur qualitativen und quantitativen Erfassung von emittierten Geruchsstoffe in Thermoholzprodukten unter Berücksichtigung der Feuchteaufnahme und des Feuchtigkeitstransports – In: Tagungsband 5. Europäischer TMT-Workshop 2008 und 2. INS-Workshop "Normung und Standardisierung von TMT", Dresden, 24.-25.04.2008
  110. Pfriem, A.: Thermoholz/Holzmodifikation als Chance im Holzbau. Vortrag Podiumsdiskussion „Landesbeirat Holz Sachsen – Handwerkertag Innovativ Bauen und Sanieren mit Holz“, Dresden, 29.02.2008
  111. Pfriem, A.; Wagenführ, A.; Unbehaun, H.; Kerns, G.: Verfahren zur deutlichen Reduzierung von emittierenden VOC aus „Flüssigholz“ (Arboform). Poster 7. Materialforschungstag des Materialforschungsverbund Dresden e. V., Dresden, 28.11.2007
  112. Pfriem, A.; Wagenführ, A.: Materialverhalten thermisch modifizierter Hölzer unter besonderer Berücksichtigung der Anforderungen für die Verwendung im Musikinstrumentenbau. Poster 7. Materialforschungstag des Materialforschungsverbund Dresden e. V. Dresden, 28.11.2007
  113. Pfriem, A.; Wagenführ, A.: Influence of a thermally modification of spruce to unsteady-state sorption processes and wood moisture-dependent elasticity – In: Hill, CAS; Jones, D.; Militz, H.; Ormondroyd, G. [Ed.]: Proceedings of the Third European Conference on Wood Modification, Cardiff, 15.-16.10.2007, S. 367-374
  114. Unbehaun, H.; Pfriem, A.; Kerns, G.; Beyer, M.: Reduction of volatile organic compounds and odour emissions by enzymatic modification of lignin containing materials – In: Hill, CAS; Jones, D.; Militz, H.; Ormondroyd, G. [Ed.]: Proceedings of the Third European Conference on Wood Modification, Cardiff, 15.-16.10.2007, S. 259-262
  115. Pfriem, A.: Möglichkeiten und Grenzen beim Einsatz thermisch modifizierter Hölzer im Bauwesen und in der Restauration. Vortrag Fachtagung „Bauen mit Holz in der Denkmalpflege“, Leipzig, 26.10.2006
  116. Pfriem, A.: Thermische Vergütung von Holz zur Verwendung im Musikinstrumentenbau – physikalische / chemische Analysen. Vortrag Neufelder Instrumentenbauer Congress und Erlebnistage, Neufelden, Österreich, 20.10.2006
  117. Pfriem, A.; Wagenführ, A.: Use of thermally modified wood for musical instruments – Vortrag International Scientific Conference “Technologies of wood processing”, Zvolen, Slowakei, 19.-20.9.2006
  118. Pfriem, A.: Thermische Holzvergütung als innovative Zukunftstechnologie – Vortrag 2. Innovationsforum Zukunftswerkstoff Holz des Förderverein Holzbau / Holzwirtschaft e.V., Lichtenstein, 24.11.2005
  119. Pfriem, A.: Thermische Modifizierung von Laubholz – Vortrag zu Tharandter Forstwissenschaftliche Kolloquien: Holzwege in die Zukunft – Wertschöpfungskette Wald – Holz, Tharandt, 22.11.2005
  120. Pfriem, A.; Wagenführ, A.; Ziegenhals G.; Eichelberger, K.: Use of wood performed by heat-treatment for musical instruments – In: Militz, H., Hill, CAS [Ed.]: Wood modification: Processes, Properties and Commercialisation – The Second European Conference on Wood Modification, Göttingen, 6.-7.10.2005, S. 390-397
  121. Pfriem, A.; Wagenführ, A.; Müller, M.: Ultraleichte Holzfaserplatten als Dämm– und Leichtbauwerkstoff – Tagungsband 5. Internationales Symposium zu „Werkstoffen aus Nachwachsenden Rohstoffen“, Erfurt, 1.-2.9.2005
  122. Wagenführ, A.; Pfriem, A.: Elastische Kennwerte thermisch modifizierter und unmodifizierter Holz-Zwillinge. Poster 3. Thermoholzworkshop, Dresden, 02.-03.06.2005
  123. Wagenführ, A.; Pfriem, A.: Untersuchungen zum Aufschluss von Holz und Flachsschäben im Extruder zur Herstellung von Holzwerkstoffen. Tagungsband 11. Internationale Chemnitzer Tagung Stoffliche Verwertung nachwachsender Rohstoffe, Chemnitz, 14.-15.10.2004, S. 149-151


d) Nicht begutachtete Veröffentlichungen

  1. Brösel L., Pfriem, A., Clauder, L.: Nachweis geführt – Brandschutzklasse. Bauen mit Holz, 05 (2014), S. 38-40
  2. Pfriem, A.; Ziegenhals, G.: „Holzmodifikation“ – Ein Weg zur Aufwertung von Holz im Musikinstrumentenbau? In: „Musikinstrumentenbauer in Berlin, Brandenburg und Mecklenburg-Vorpommern, 2012
  3. Buchelt, B.; Scheiding, W.; Pfriem, A.; Eichelberger, K.; Wagenführ, A.: Thermisch modifizierte Furniere für dekorative Zwecke. Holz-Zentralblatt 137 (2011) 6, S. 156
  4. Buchelt, B.; Pfriem, A.; Wagenführ, A.: Farbdifferenzen in thermisch modifizierten Hölzern. Holz-Zentralblatt 136 (2010) 2, S. 58
  5. Unbehaun, H.; Kerns, G.; Wagenführ, A.; Pfriem, A.; Beyer, M.; Liebner, F.: Arboform im Musikinstrumentenbau: Enzymatische Modifikation zur Reduzierung der Geruchsemissionen und Verbesserung der mechanischen Eigenschaften. Musicon Valley Report 2006, S. 55-58
  6. Pursche, Th.; Pfriem, A.: Temperaturverhalten von Thermoglättwerkzeugen. HOB – Die Holzbearbeitung 53 (2006) 3, S. 100-102
 
Folgen Sie uns auf: