Springe direkt zum Inhalt

HNE Eberswalde Organisations-Menü

Springe direkt zum Inhalt
Sie sind hier: Research » Projects » Simultaneous shaping and fixation of veneer

Working Group "Wood Chemistry, Wood Physics and Chemical Engineering"




Professorship "Wood Chemistry, Wood Physics and Chemical Engineering"

Alexander Pfriem

Prof. Dr.-Ing.

Position:

Vice-President for Research and Technology Transfer

Room:
25.003
Telefon:

+49 (3334) 657 377

Fax:
+49 (3334) 657 372
E-Mail:

alexander.pfriem@hnee.de

Homepage:
www.wood-modification.net
Alexander Pfriem 003





About us

Our goal is to give special properties to wood and to make it more resistant to thermal, chemical and physical loads. Developing new ways of transformation and modification of wood leads to highly sustainable products made of wood. Treated wooden products must have a minimized environmental impact. This opens up new areas of industrial and entrepreneurial application with a considerable potential for innovation


Member of Working Group

Prof. Dr.-Ing. Alexander Pfriem (alexander.pfriem(at)hnee.de)
Dr. rer. silv. Nadine Herold (nadine.herold(at)hnee.de)
M.Sc. Lothar Clauder (lothar.clauder(at)hnee.de)
Dipl.-Ing. (FH) Fabian Wulf (fabian.wulf(at)hnee.de)
Dipl.-Ing. (FH) Moritz Sanne (moritz.sanne(at)hnee.de)
Dipl.-Ing. (FH) Jens-Peter Stephan (jens-peter.stephan(at)hnee.de)
Dipl.-Ing. Mario Zander (mario.zander(at)hnee.de
B.Sc. Tom Franke (tom.franke(at)hnee.de)
B.Sc. Tom Brodhagen (tom.brodhagen(at)hnee.de)


Further information:

Wood Modification Network in the Baltic Sea Region: www.wood-modification.net

Follow me on ResearchGate

Prof. Dr. Alexander Pfriem
Cordis-Partner Profil: apfriem

Maps: http://osm.org/go/0MemAsqY0--?m=


Publications:

Pfriem, A.: Thermally modified wood for use in musical instruments. Drvna industrija — “Wood Industry”, 66 (2015) 3, 251-253

Herold, N.; Grigsby, W.; Franich, R.; Pfriem, A.: Changes in Stiffness of Wood Veneer during Furfuryl Alcohol Modification. European Journal of Wood and Wood Products, Online first, DOI: 10.1007/s00107-015-0941-x

Hughes, M.; Hill, C.A.S.; Pfriem, A.: The toughness of hydrothermally modified wood — A review. Holzforschung, 69 (2015) 7, S. 851-862

Willems, W.; Lykidis, C.; Altgen, M.; Clauder, L.: Quality control methods for thermally modified wood. Holzforschung, 69 (2015) 7, S. 875—884

Wulf, F.; Schulz, K.; Brösel, L.; Pfriem, A.: Mineralized wood fibre reinforced concrete as stiffening elements with reduced density. Drvna industrija — “Wood Industry”, 66 (2015) 1, S. 57-62; DOI: 10.5552/drind.2015.1345

Herold, N.; Lenz, C.; Pfriem, A.:Changes in Cell Wall Dimensions during the Different Stages of Furfuryl Alcohol Modification. BioResources, 9 (2014) 3, S. 4756-4763; Article download (Open Access)

Herold, N.; Lenz, C.; Pfriem, A.: Changes in Cell Wall Dimensions during the Different Stages of Furfuryl Alcohol Modification. 7th European Conference on Wood Modification, Lissabon, Portugal, 10.-12.03.2014

Herold, N.; Pfriem, A.: Simultaneous moulding and fixation of veneer by specific material modification. 7th European Conference on Wood Modification, Lissabon, Portugal, 10.-12.03.2014

Herold, N.; Pfriem, A.: Shape Retention of Furfurylated and Moulded Wood Veneer. BioResources, 9 (2014) 1, S. 545-553; Article download (Open Access)

Herold, N.; Pfriem, A.: Set-recovery of furfurylated and shaped veneer. 9th meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE), Hannover, Germany, 11.-12.09.2013

Herold, N., Pfriem, A.: Impregnation of Veneer with Furfuryl Alcohol for an Improved Plasticization and Moulding. European Journal of Wood and Wood Products, 71 (2013) 2, S. 281-282, DOI:10.1007/s00107-013-0677-4

Herold, N.; Dietrich, T.; Grigsby, W. J.; Franich, R. A.; Winkler, A.; Buchelt, B.; Pfriem, A.: Effect of maleic anhydride content and ethanol dilution on the polymerization of furfuryl alcohol in wood veneer studied by differential scanning calorimetry. BioResources. 8 (2013) 1, S. 1064-1075; Article download (Open Access)

Herold, N.; Dietrich, T.; Grigsby, W.; Franich, R.; Winkler, A.; Buchelt, B.; Pfriem, A.: Effects of Maleic Anhydride on the Curing of Furfuryl Alcohol in Wood Veneer Studied by Differential Scanning Calorimetry. Workshop “Micro Characterisation of Wood Material & Properties”, Edinburgh, Scotland, 24.-26. Oktober 2012

Herold, N.; Dietrich, T.; Grigsby, W.; Buchelt, B.; Franich, R.; Pfriem, A.: Effects of Different Process Parameters on the Polymerisation of Furfuryl Alcohol in Wood Studied by DSC. 6th European Conference on Wood Modification, Ljubljana, Slowenien, 16-18.09.2012

Herold, N.; Pfriem, A.: Impregnation of Veneer with Furfuryl Alcohol for an Improved Plasticization and Moulding. 6th European Conference on Wood Modification, Ljubljana, Slowenien, 16-18.09.2012

Zauer, M.; Pfriem, A.; Wagenführ, A.: Alteration of the pore structure and the capillarity of wood due to thermal modification. 6th European Conference on Wood Modification, Ljubljana, Slowenien, 16-18.09.2012

Dietrich, T.; Pfriem, A.; Buchelt, B.; Wagenführ, A.: Densification of beech wood: Furfuryl alcohol impregnation for improved plasticization, fixation and properties. „Hardwood Science and Technology” The 5th Conference on Hardwood Research and Utilisation in Europe, 10.-11.09.2012, Sopron, Hungary

Buchelt, B.; Pfriem, A.; Wagenführ, A.: Investigations of the compressive behavior of veneer in thickness direction. Drvna industrija — “Wood Industry”, 63 (2012) 1, S. 33-36, DOI:10.5552/drind.2012.1122

Pfriem, A.; Buchelt, B.; Dietrich, T.: Furfuryl alcohol impregnation for improved plasticization and fixation during the densification of wood. COST Action FP0904 Workshop “Current and Future Trends of Thermo-Hydro-Mechanical Modification of Wood Opportunities for new markets? Nancy, France, 26.-28.03.2012, Posterdownload

Zauer, M.; Pfriem, A.; Wagenführ, A.: Alteration of the pore structure and the capillarity of wood due to thermal modification. COST Action FP0904 Workshop “Current and Future Trends of Thermo-Hydro-Mechanical Modification of Wood Opportunities for new markets? Nancy, France, 26.-28.03.2012

Pfriem, A., Dietrich, T., Buchelt, B.: Furfuryl alcohol impregnation for improved plasticization and fixation during the densification of wood. Holzforschung, 66 (2012) 2, 215-218, DOI:10.1515/HF.2011.134

Pfriem, A.: Alteration of Water Absorption Coefficient of Spruce (Picea abies (L.) Karst.) due to Thermal Modification. DRVNA INDUSTRIJA 62 (2011) 4, 311-313, DOI:10.5552/drind.2011.1109

Pfriem, A.: Simultaneous shaping and fixation of veneer by specific material modification. COST Early Stage Researchers Forum, Warschau, Polen, 26.09.2011, Link to presentation

Herold, N.; Peters, J.; Zauer, M.; Fischer, S.; Pfriem, A.: Improving of the mechanical properties of thermally modified wood by a prior chemical treatment. COST Action FP0904 Workshop “Hierarchical structure and mechanical characterization of wood” Helsinki, Finnland, 24.-26.08.2011, Link to presentation

Herold, N.; Pfriem, A.: Simultaneous shaping and fixation of veneer by specific material modification. COST Action FP0904 Workshop “Thermo-Hydro-Mechanical Wood Behaviour and Processing” Biel, Schweiz, 16.-18.02.2011, S. 153-154

Pfriem, A.; Buchelt, B.; Dietrich, T.; Zauer, M.: Revaluation of European hardwood species by a combined modification, compressing and shaping processes. 5th European Conference on Wood Modification, Riga, Lettland, 20.-21.09.2010



Download

Short poster presentation of the research project.
(last change: 22.01.2016 by Alexander Pfriem)